Current Research Interests
  • Artificial Intelligence (AI) & Machine Learning (ML) in Manufacturing
  • Brain Computer Interface (BCI) in Manufacturing
  • Experimental & Numerical Analyses of Manufacturing Processes
    (Focus: Fusion & Solid-State Welding, Wire-based Additive Manufacturing)
Education / Qualifications
Responsibility
Current
Past
Teaching Experience

Industrial Experience
  • Engg & Dev Division of Grasim Industries Ltd. (MP) (1994-1995)

Visiting Professorship


Sponsored Projects (Total Amount : ~ Rs. 92.08 Cr)

#Project DetailsStatus
1.
Title: AR/VR in Manufacturing applications

Sponsoring Agency: Department of Heavy Industry (DHI), Ministry of Heavy Industries & Public Enterprises, GoI
Industry Partner: Tata Motors Limited
Investigators:
Prof. Debashish Chakravarty
Prof Surjya K Pal
Duration: 3 years from August 2024
Amount: Rs. 1.86 Cr Project will be executed under Centre of Excellence in Advanced Manufacturing Technology
Ongoing
2.
Title: Real-time weld defect monitoring and control in Body in White (BIW) structure of automotive vehicles

Sponsoring Agency: Department of Heavy Industry (DHI), Ministry of Heavy Industries & Public Enterprises, GoI
Industry Partner: Tata Motors Limited
Investigators:
Prof Surjya K Pal
Prof. Sudip Misra
Duration: 3 years from August 2024
Amount: Rs. 6.76 Cr Project will be executed under Centre of Excellence in Advanced Manufacturing Technology
Ongoing
3.
Title: Cobot based vision analytics for quality inspection in automobile process line

Sponsoring Agency: Department of Heavy Industry (DHI), Ministry of Heavy Industries & Public Enterprises, GoI
Industry Partner: Tata Motors Limited
Investigators:
Prof Surjya K Pal
Prof. Sudip Misra
Duration: 3 years from August 2024
Amount: Rs. 5.37 Cr Project will be executed under Centre of Excellence in Advanced Manufacturing Technology
Ongoing
4.
Title: AI-enabled NDT software for auto-evaluation of industrial ToFD data

Sponsoring Agency: Technology Innovation Hub, IIT Kharagpur
Investigators:
Prof Surjya K Pal
Duration: 1.5 years from July 2023
Amount: Rs. 39.83 Lakhs
Ongoing
5.
Title: Design and Fabrication of a Cold Plate using Friction Stir Channeling for Thermal Management of Electronic Systems and Battery Packs

Sponsoring Agency: Department of Science and Technology (DST)
Investigators:
Prof Surjya K Pal
Prof Anandaroop Bhattacharya
Duration: 3 years from December 2019
Amount: Rs. 39 Lakhs
Completed
6.
Title: Remote Monitoring and Real Time Control of Defects in Friction Stir Welding Process and Preventive Health Monitoring of Friction Stir Welding Machine

Sponsoring Agency: Department of Heavy Industry (DHI), Ministry of Heavy Industries & Public Enterprises, GoI
Industry Partner: Tata Consultancy Services Limited
Investigators:
Prof. Surjya K Pal
Prof. Sudip Misra
Duration: 3 years from December 2017
Amount: Rs. 7.49 Cr Project is being executed under Centre of Excellence in Advanced Manufacturing Technology
Completed
7.
Title: Innovation Lab

Sponsoring Agency: Department of Heavy Industry (DHI), Ministry of Heavy Industries & Public Enterprises, GoI
Investigator:
Prof. Surjya K Pal
Duration: 1 year from December 2017
Amount: Rs. 24.87 Cr Project is being executed under Centre of Excellence in Advanced Manufacturing Technology
Completed
8.
Title: Opened & Intelligent Plug-in Hybrid Electric Vehicle (PHEV) Technologies for Smart Indian Cities

Sponsoring Agency: Ministry of Human Resource Development (MHRD), GoI
Investigators:
Prof. Siddhartha Mukhopadhyay
Prof. Alok Kanti Deb
Prof. Amit Patra
Prof. Aurobinda Routray
Prof. Bhargab Maitra
Prof. Chandan Chakraborty
Prof. Debashish Chakravarty
Prof. Dhananjay Kumar Srivastava
Prof. Pallab Dasgupta
Prof. Partha Pratim Chakrabarti
Prof. Prasanta Kumar Das
Prof. Soumyajit Dey
Prof. Sudipto Ghosh
Prof. Surjya Kanta Pal
Mr. Prasanta Sarkar
Prof. Tanmoy Bhattacharya
Duration: 3 years from October 2016
Amount: Rs. 19.89 Cr
Completed
9.
Title: Thermo-mechanically Processed High Strength Baintic Steel Rails for Indian Railways

Sponsoring Agency: Ministry of Indian Railways, GoI
Investigator:
Prof. Shiv B Singh
Prof. Surjya K Pal
Prof. Sudipto Chakraborty
Prof. Debalay Chakrabarti
Duration : 3 years from June 2016
Amount: Rs. 1.98 Cr
Completed
10.
Title: Friction Stir Welding of Aluminum and Steel Sheet Metals for Automobile Components

Sponsoring Agency: Department of Science and Technology (DST), GoI
Investigators:
Prof. Surjya K Pal
Prof. Shiv B Singh
Duration: 3 years from March 2016
Amount: Rs. 44.04 Lakh
Completed
11.
Title: Thermo-mechanically Processed High Strength Baintic Steel Rails for Indian Railways (Bridge Project)

Sponsoring Agency: Research Designs & Standards Organisation (RDSO), GoI
Investigator:
Prof. Shiv B Singh
Prof. Surjya K Pal
Prof. Debalay Chakrabarti
Prof. Sudipto Chakraborty
Duration : 3 years from June 2016
Amount: Rs. 4.25 Lakh
Completed
12.
Title: Research on AGV

Sponsoring Agency: IIT Kharagpur
Investigators:
Prof. Debashish Chakravarty
Prof. Partha Pratim Chakrabarti
Prof. Partha Pratim Das
Prof. Dilip Kumar Pratihar
Prof. Manoranjan Sinha
Prof. Surjya Kanta Pal
Duration: 3 years from June 2014
Amount: Rs. 2.18 Cr
Completed
13.
Title: Steel Technology Centre

Sponsoring Agency: Department of Science and Technology (DST), GoI  Ministry of Steel, GoI
Investigators:
Prof. Shiv B Singh
Prof. Surjya K Pal
Prof. Sudipto Chakraborty
Duration: 5 years from December 2007
Amount: Rs. 20.25 Cr
Completed
14.
Title: Multi-sensor Based Tool Condition Monitoring in Drilling

Sponsoring Agency: Council of Scientific & Industrial Research (CSIR), GoI
Investigators:
Prof. Surjya K Pal
Duration: 3 years from April 2007
Amount: Rs. 7.56 Lakh
Completed
15.
Title: Machine Tool Vibration Monitoring

Sponsoring Agency: ISIRD Project from IIT Kharagpur  NRF, South Africa
Investigators:
Prof. Surjya K Pal
Prof. P. S. Heyns (University of Pretoria)
Duration: 3 years from November 2006
Amount: Rs. 3.5 Lakh
Completed
16.
Title: Drill Wear Monitoring using Soft Computing Techniques

Sponsoring Agency: ISIRD Project from IIT Kharagpur
Investigators:
Prof. Surjya K Pal
Duration: 3 years from November 2004
Amount: Rs. 3 Lakh
Completed
17.
Title: Through Process Modelling and Simulation of Hot Rolling of Steel using Bond Graph

Sponsoring Agency: Department of Science and Technology (DST), GoI
Investigators:
Prof. Surjya K Pal
Duration: 3 years from August 2003
Amount: Rs. 4.68 Lakh
Completed

Consultancy Projects

#Project DetailsStatus
1.
Title: Real-time Al-based image processing solution for Inspection of quality of outdoor unit of split AC

Sponsoring Agency: Blue Star Climatech Limited
Investigators:
Prof Surjya K Pal
Duration: 3 months from November 2024
Ongoing
2.
Title: Design Review of the Automatic Kitchen System

Sponsoring Agency: Yuvya India Private Limited
Investigators:
Prof Surjya K Pal
Prof Partha Pratim Chakrabarti
Duration: 4 months from September 2024
Ongoing
3.
Title: intelligent Data Interfacing (iDI): development of AmploFly4.0TM data module

Sponsoring Agency: Amplo Global Inc. USA
Investigators:
Prof Surjya K Pal
Duration: 6 months from August 2024
Ongoing
4.
Title: Development of a low-cost AI-based tyre specification reading and downstream analytics

Industry: Tata Motors Limited, Jamshedpur
Investigators:
Prof. Surjya K Pal
Duration: 3 months from February 2024
Ongoing
5.
Title: Development of machine learning based exhauster health monitoring and prediction system

Industry: Research & Development Centre for Iron & Steel (RDCIS) SAIL,Ranchi
Investigators:
Prof. Surjya K Pal
Duration: 18 months from October 2022
Completed
6.
Title: Development and Implementation of an Artificial Intelligence enabled weld defect identification and classification system

Industry: Garden Reach Shipbuilders & Engineers Ltd
Investigators:
Prof. Surjya K Pal
Prof. Nisith R Mandal
Duration: 6 months from September 2021
Completed
7.
Title: Microstructure Property Correlation in Hot and Cold Rolled High Strength Steels

Industry: Tata Steel Limited
Investigators:
Prof. Shiv B Singh
Prof. Surjya K Pal
Prof. Sudipto Chakraborty
Duration: 2 years from January 2017
Completed
8.
Title: Heat Transfer Characterization of Nozzles Used in Continuous Caster & Designing of Heat Transfer Simulation for Secondary Cooling Region

Sponsoring Agency: R&D Centre for Iron and Steel (RDCIS), Ranchi
Investigators:
Prof. Sudipto Chakraborty
Prof. Surjya K Pal
Completed
9.
Title: Finite element analysis of stress distribution in a nipple-electrode joint

Sponsoring Agency: HEG Limited, Bhopal
Investigator:
Prof. Surjya K Pal
Completed
10.
Title: Design and Development of Mathematical Model for Ultrafast Cooling of Steel Strips

Industry: Tata Steel Limited
Investigators:
Prof. Surjya K Pal
Prof. Sudipto Chakraborty
Completed
11.
Title: Up-gradation of the Manufacturing Techniques of Producing Brass Utensils for the Artisans at Hazo, Guwahati

Industry: State Bank of India
Investigators:
Prof. P. S. Robi
Prof. Surjya K Pal
Completed


Total Publications : 327



Patent and copyright : 18

#TitleYear
18Gulshan, R., Paswan, U., Pal, S. K., Mukherjee, A.,
AI Enabled NDT System
(Diary No: 21253/2023-CO/SW).
2023
17Vishwanathan, A. K., Dutta, A., Mukherjee, A., Pal, S. K.,
A method and system for automatically detecting weld defects in ultrasonic Time-of-Flight Diffraction (ToFD)
(Filed Ref No: 202331060331).
Granted, Patent no,: 529585 Patent Certificate
2023
16Karmakar, S., Swarnakar, R., Pal, S. K.,
Cost-effective high-speed friction stir welding system for mass production of dissimilar metal structures and method thereof
(Filed Ref No: 202331018431).
2023
15Swarnakar, R., Karmakar, S., Pal, S. K.,
Fabrication of internally cladded bimetallic tubes and components through friction stir back extrusion
(Filed Ref No: 202331015441).
2023
14Ghosh, S., Mypati, O., Nayak, P., Pal, S. K.,
An automated system for fuse box assembly inspection and fault detection and a method thereof
(Filed Ref No: 202331009507).
2023
13Srinivasan, A., Mypati, O., Pal, S. K.
An automated system for printed circuit board inspection and fault detection and a method thereof
(Filed Ref No: 202331011502).
2023
12Mypati, O., Polkampally, P. K., Pal, S. K., Srirangam, P.
Graphene-induced high conductive friction stir spot welded aluminum and copper tabs for Li-ion batteries
(Filed Ref No: 202231006720).
2022
11Banerjee, A., Mishra, D., Nayak, P., Pal, S. K., Chakravarty, D.
Low-cost real-time machine vision based quality inspection system
(Filed Ref No: 202031050404).
2020
10Kumar, K., Majumdar, A., Chandra M. G., Kumar, A., Mishra, D., Pal, S. K.,
Method and system for multi sensor fusion using tranform learning
(Filed Ref No: 202021036163).
2020
9Racherla, V., Sharma, V. M., Pal, S. K.,
A system for fabrication of bonded metal foam metal sandwich structures and process thereof
(Filed Ref No: 202031016609).
Granted, Patent no,: 483879 Patent Certificate
2020
8Sarkar, P., Pal, S. K., Bhattacharya, A., Mishra, P.,
A method for friction stir spiral tunneling (FSST) in pipe and a system to carry out such method
(Filed Ref No: 202031010846).
Granted, Patent no,: 547674 Patent Certificate
2020
7Racherla, V., Sharma, V. M., Pal, S. K.,
A system for solid state sintering of hollow metallic cylindrical components and a method of such sintering
(Filed Ref No: 202031006307).
Granted, Patent no,: 502093 Patent Certificate
2020
6Mishra, D., Pal, S. K., Gupta, A., Raj, P., Kumar A., Anwer S., Chakravarty, D., Pal, S., Chakravarty, T., Pal, A., Misra, P., and Misra, S.
A System for Real Time Monitoring, Prediction and Control of Weld Quality in Friction Stir Welding
(Filed Ref No: 202031000072).
Granted, Patent no,: 517687 Patent Certificate
2020
5Pal, S. K., Rohan Basu, R., Singh, A. K., Barua, A., Kumar, A., Ghosh, A., Majumdar, S., Riya, Mishra, D., and Pal, S.
System for real-time monitoring and controlling friction stir welding,
(Filed Ref No: 201831024813).
Granted, Patent no,: 537304 Patent Certificate
2018
4Pal, S. K., Khan, A. R., Ranjan, R., Parikh, C., Pal, S., Chakravarty, D., Maiti, A.,
Real time surface defect analysis and correction in friction stir welding process by image processing
(Filed Ref No: 201831035477).
Granted, Patent no,: 514971 Patent Certificate
2018
3Racherla, V., Sharma, V. M., Pal, S. K.,
Add-on Kit for Doing Cost Effective, Energy Efficient, Rapid, Solid-State Friction Sintering on Vertical Milling/Drilling/Friction Stir Welding Machines
(Filed Ref No: 201731037839).
Granted, Patent no,: 518403 Patent Certificate
2017
2Pal, S. K., Kumari, K., Mahto, R. P., Sharma, V.,
A Counter Rotating Pin and Shoulder Tool Arrangement for Friction Stir Weld System
(Filed Ref No: 201631016398).
Granted, Patent no,: 390471 Patent Certificate
2016
1Pal, S. K., Kumari, K., Sharma, V.,
Counter Rotating Twin Tool with Variable Gap Setup for Friction Stir Welding
(Filed Ref No: 1297/KOL/2014).
Granted, Patent no,: 501645 Patent Certificate
2014

Textbook : 1

#TitleYear
1
Pal S.K., Mishra D., Pal A., Dutta S., Chakravarty D., Pal S., Digital Twin - Fundamental Concepts to Applucations in Advanced Manufacturing, Springer Series in Advanced Manufacturing, Springer, eBook ISBN: 978-3-030-81815-9, Hardcover ISBN: 978-3-030-81814-2, Series ISSN: 1860-5168, Edition number: 1, Link: https://www.springer.com/in/book/9783030818142
2021

International Journal : 210

#TitleYear
210
Karmakar, S., Pal, S. K., “Improvement of directional anisotropy and its impact on surface and mechanical properties of a rib-on-plate structure fabricated through friction stir processing of additively manufactured friction stir surfaced structure”, Journal of Manufacturing Processes, Elsevier Publication.
2024
209
Sarkar, P., Pal, S.K., Shollock, B., Bhattacharyya, A., "Controlling Shape, Size, and Surface Roughness of Aluminum Cold Plate Fabricated via Single-Step Sub-Surface Friction Stir Channeling for Battery Pack Cooling", CIRP Journal of Manufacturing Science and Technology, Elsevier.
2024
208
Ayankoso, S., Dutta, A., He, Y., Gu, F., Ball, A., Pal, S. K., “Comparative Analysis of Vibration and Current Signals in the Fault Diagnosis of Induction Motors Using Deep Learning and Machine Learning Techniques”, Structural Health Monitoring, SAGE Publications.
2024
207
Sen, D., Pal, S. K., Panda, S. K., “Crushing performance of cost-effective tubular components fabricated through friction stir welding process for automotive application”, Archives of Civil and Mechanical Engineering, Springer.
2024
206
Sadhu, A., Mypati, O., Nath, A. K., Pal, S. K., “Performance Evaluation of Laser Deposited Functionally Graded Stellite 6-WC Tools in Friction Stir Lap Welding of CuCrZr-SS304”, Journal of Materials Engineering and Performance, Springer.
2024
205
Bhattacharyya, S., Kumar, P., Chaudhary, D., Pal, S. K., Chakraborty, S., “Development of Electroless Ni-P-Cu composite coating: A characterization, corrosion and thermal study on AISI- 1040 used in Heat Exchangers”, Journal of the Minerals, Metals & Materials Society, Springer.
2024
204
Chakraborty, S., Guha, S., Mishra, D., Pal, S. K., “Federated Learning for Weld Quality Prediction”, Journal of Dynamics, Monitoring and Diagnostics, Intelligence Science and Technology Press Inc.
2024
203
Dutta, A., Pal, S. K., Panda, S. K., “Friction stir seam- and spot-welded aluminium honeycombs: enhanced structural integrity eliminating adhesive bonding challenges”, Journal of Materials Processing Technology, Elsevier Publications.
2024
202
Bhavsar, P., Dutta, A., Pal, S. K., “Detection of electrode misalignment and its effect on joint quality in resistance spot welding: a low-cost computer vision-based approach”, Measurement Science and Technology, IOP Science.
2024
201
Dutta, A., Pal, S. K., Panda, S. K., “Comprehensive investigation on crushing performance and collapse mechanism of friction stir welded aluminium honeycomb by damage modeling”, Journal of Manufacturing Processes, Elsevier, 101, 701-713.
2024
200
Swarnkar, R., Karmakar, S., Pal, S. K., “Temperature Evolution, IMC Formation, and Resulting Bonding Efficacy in Bimetallic Tubular Components Fabricated by a Novel Friction Stir Backward Extrusion Cladding Method”, CIRP Journal of Manufacturing Science and Technology, Elsevier.
2024
199
Mukherjee, A., Dibya, A. B., Sivvani, M., Pal, S.K., “Cognitive Intelligence in Industrial Robots and Manufacturing”, Computers & Industrial Engineering, Elsevier.
2024
198
Vishwakarma, R., Chakladar, N. D., Pal, S. K., “Effect of Carbon fiber reinforcement on an Aluminium Metal Matrix composite joint through upward friction stir processing”, Metals and Materials International, Springer.
2024
197
Mahto, R. P., Iqbal, P., Kumari, K., Pal, S. K., “Control of the Weld Heterogeneity by using A Novel Counter Variable Pin Shoulder Rotation Friction Stir Welding”, Journal of Manufacturing Science and Engineering, ASME.
2024
196
Karmakar, S., Swarnkar, R., Pal, S. K., “A novel zero tool defect accelerated friction stir thin sheet welding technique for automotive light-weight structural component fabrication with dissimilar material”, Materials Chemistry and Physics, Elsevier.
2024
195
Dutta, A., Pal, S. K., Panda, S. K., “Backing plate material selection for optimizing joint performance in friction stir welded aluminium honeycomb”, Journal of Sandwich Structures & Materials, SAGE Publications.
2024
194
Reddy, J., Dutta, A., Mukherjee. A., Pal, S. K., “A low-cost vision-based weld-line detection and measurement technique for robotic welding”, International Journal of Computer Integrated Manufacturing, Taylor & Francis.
2024
193
Hoda, N., Pal, S. K., Paul, J., “A novel counter-rotating twin-tool friction stir processing technology for fabrication of Al/SiC surface composite with improved particle distribution”, CIRP Journal of Manufacturing Science and Technology, Elsevier.
2023
192
Tapwal, R., Mishra, S., Pal, S. K., “UtilityChain: Dynamic Resource Allocation for Mining and Servicing in Blockchain System”, IEEE Transactions on Services Computing, IEEE.
2023
191
Dutta, A., Pal, S. K., Panda, S. K., “Experimental and numerical assessment of thermomechanical and morphological characteristics of pin and pinless micro friction stir welds”, Materials Today Communications, Elsevier.
2023
190
Dutta, A., Pal, S. K., Panda, S. K., “A novel method of fabricating aluminium honeycomb core by friction stir welding”, Thin-walled structures, Elsevier.
2023
189
Karmakar, S., Swarnkar, R., Pal, S. K., “Effect of multi-layer deposition in solid-state friction stir surfacing-based additive manufacturing for fabrication of large-scale metal product”, Journal of Materials Processing Technology, Elsevier.
2023
188
Nayak, S. S., Iqbal, P., Jain, R., Srirangam, P., Pal, S. K., “A Computationally Efficient Multiphysics Model for Friction Stir Welding with Polygonal Pin Profiles”, Journal of Adhesion Science and Technology, Taylor and Francis.
2023
187
Sen, D., Pal, S. K., Panda, S. K., “Effect of tool concavity on flash formation during fabrication of tubes through friction stir welding”, Journal of Engineering Manufacture, SAGE Publications.
2023
186
Sarkar, P., Pal, S.K., Shollock, B., Bhattacharya, A., “The influence of shoulder-workpiece clearance on channel formation during friction stir channeling at low and high heat inputs”, Journal of Manufacturing Processes, Elsevier.
2023
185
Mypati, O., Mukherjee, A., Mishra, D., Chakrabarty, P. P., Pal, S. K., “A Critical Review on Applications of Artificial Intelligence in Manufacturing”, Artificial Intelligence Review, Springer.
2023
184
Swarnkar, R., Karmakar, S., Pal, S. K., “An investigation of bimetallic tube fabrication through a novel friction stir based technology for automotive applications”, Materials Today Communications, Elsevier.
2023
183
Tapwal, R., Mishra, S., Pal, S. K., “PerBlocks: A Reconfigurable Blockchain for Service Provisioning in Industrial Environment”, IEEE Transactions on Industrial Informatics, IEEE.
2023
182
Sen, D., Pal, S. K., Panda, S. K., “Numerical simulation on end expansion of tubes fabricated through friction stir welding and validation of fracture behavior”, CIRP Journal of Manufacturing Science and Technology, CIRP.
2023
181
Bhattacharyya, S., Mohanty, D., Kumar, P., Das, S. K., Sahoo, P., Pal, S. K., Chakraborty, S., “A corrosion and tribo-failure analysis of Ni-P-Cu coated mild steel (AISI-1040) at varied copper concentration”, Engineering Failure Analysis, Elsevier.
2023
180
Mondal, M, Ajmeria, R., Halder, T., Chakravarti, D., Misra, S., Pal, S. K., “A Critical Survey of EEG-based BCI Systems for Applications in Industrial Internet of Things”, IEEE Communications Surveys and Tutorials, IEEE.
2022
179
Mypati, O., Polkampally, P. K., Pal, S. K., Srirangam, P., “TEM analysis and molecular dynamics simulation of graphene coated Al-Cu micro joints”, Carbon Trends, Elsevier.
2022
178
Tapwal, R., Dev, P., Mishra, S., Pal, S. K., “Traces: Inkling Blockchain for Distributed Storage in Constrained IIoT Environments”, IEEE Transactions on Industrial Informatics, IEEE.
2022
177
Mishra, D., Priyadarshi, A., Das, S. M., Shree, S., Gupta, A., Pal, S. K., Chakravarty, D., “Industry 4.0 Application in Manufacturing for Real-Time Monitoring and Control”, Journal of Dynamics, Monitoring and Diagnostics, Intelligence Science and Technology Press Inc.
2022
176
Upadhyay, R., Asi, A., Nayak, P., Prasad, N., Mishra, D., Pal, S. K., “Real-time deep learning–based image processing for pose estimation and object localization in autonomous robot applications”, The International Journal of Advanced Manufacturing Technology, Springer, 1-15.
2022
175
Mypati, O., Anwaar, T., Mitra, D., Pal, S. K., Srirangam, P., “Characterization and modelling of Al and Cu busbar during charging and discharging of Li-ion battery for electric vehicles”, Applied Thermal Engineering, Elsevier.
2022
174
Shrivastava, A., Chakraborty, S. S., Pal, S. K., “Thermo-mechanical finite element analysis of single-track deposition of Inconel-625 on AISI-1020 substrate”, Materials Today: Proceedings, Elsevier.
2022
173
Tapwal, R., Deb, P. K., Misra, S., Pal, S. K., “Amaurotic Entity-Based Consensus Selection in Blockchain-Enabled IIoT”, IEEE Internet of Things Journal, IEEE.
2022
172
Tapwal, R., Deb, P. K., Misra, S., Pal, S. K., “Shadows: Blockchain Virtualization for Interoperable Computations in IIoT Environments”, IEEE Transactions on Computers, IEEE.
2022
171
Datta, A., Shrivastava, A., Chakraborty, S.S., Pal, S. K., “Effect of work material combination and welding speed in dissimilar friction stir welding of aluminium to steel”, Materials Today: Proceedings, Elsevier.
2022
170
Mypati, O., Sahu, S., Pal, S. K., Srirangam, P., “An investigation of mechanical and electrical properties of friction stir welded Al and Cu busbar for battery pack applications”, Materials Chemistry and Physics, Elsevier, 287, 126373.
2022
169
Mypati, O., Pal, S. K., Srirangam, “Tensile and fatigue properties of aluminum and copper micro joints for Li-ion battery pack applications”, Forces in Mechanics, Elsevier, (Accepted: May 30, 2022).
2022
168
Iqbal, P., Jain, R., Pal, S. K., Mandal, P., Numerical modelling of friction stir welding of pipes : Effect of tool shoulder on mechanical property and metallurgical characterization, J. Manuf. Process. 79 (2022) 326–339.
2022
167
Mypati, O., Pawar, R. M. A., Sengupta, I., Sharma, V. M., Majumder, S. B., Pal, S. K., Srirangam, P., “The synthesis of novel porous graphene anodes for fast charging and improved electrochemical performance for lithium-ion batteries”, Energy Sources, Part A Recover. Util. Environ. Eff. 44 (2022) 4349–4363.
2022
166
Sen, D., Pal, S. K., Panda, S. K., “Fabrication of longitudinal welded tube of aluminium alloy for structural application using friction stir welding process and its characterization”, Archives of Civil and Mechanical Engineering, Springer (Accepted: February 26, 2022).
2022
165
Sadhu, A., Sarkar, S., Chattopadhyay, A., Mypati, O., Pal, S. K., Nath, A. N., “Effect of Laser Shock Peening on micro-structure and mechanical properties of Friction Stir Welded CuCrZr sheets”, Materials Science and Engineering: A, Elsevier, 831, 142238.
2022
164
Mahto, R. P., Rout, M., Pal, S. K., “Mechanism of microstructure evolution and grain growth in friction stir welding of AA6061-T6 and AISI304 in air and water media”, Materials Chemistry and Physics, Elsevier, 273, 125081.
2021
163
Sengupta, I., Kumar, S. S., Pal, S. K., Chakraborty, S., “Investigating the effect of graphite pretreatment and contribution of the oxidizer in the synthesis of graphite oxide by hummers approach”, Fullerenes, Nanotubes and Carbon Nanostructures, Taylor & Francis, 1-12.
2021
162
Mypati, O., Kumar, P. P., Iqbal, P., Pal, S. K., Srirangam, P., “Molecular dynamics simulation of atomic diffusion in friction stir spot welded Al to Cu joints, Mechanics of Advanced Materials and Structures”, Taylor & Francis, 1-7.
2021
161
Rout, M., Singh, S. B., Pal, S. K., “Texture development in 304LN austenitic stainless steel during post-hot-axisymmetric compression”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Publications, 235, 1131-1143.
2021
160
Marazani, T., Akinlabi, E., Madyira, D., Majumdar, J. D., Pal, S. K., “Microstructural, elemental, mechanical and structural attributes of AA1100/17-4 PH stainless steel composites fabricated via friction stir processing”, Engineering Solid Mechanics, Growing Science, 9, 391-414.
2021
159
Sharma, V. M., Pal, S. K., Racherla, V., Fabrication of Copper Foam Using Friction Processing, Manufacturing Letters, (Accepted: July 01, 2021), https://doi.org/10.1016/j.mfglet.2021.06.004, Elsevier.
2021
158
Sharma, V. M., Pal, S. K., Racherla, V., Effect of tool traverse speed on fabrication of open-cell copper foam using friction processing, The International Journal of Advanced Manufacturing Technology, Springer (Accepted: June 18, 2021)
2021
157
Sahu, S., Mypati, O., Pal, S.K., Shome, M., Srirangam, P., "Effect of weld parameters on joint quality in friction stir welding of Mg alloy to DP steel dissimilar materials", CIRP Journal of Manufacturing Science and Technology, Elsevier Publications (Accepted: 11 June 2021)
2021
156
Mishra, D., Gupta, A., Raj, P., Kumar, A., Anwer, S., Pal, S. K., Chakravarty, D., Pal, S., “Sensor-based real-time information for monitoring and control of a manufacturing process, Engineering Research Express, Vol 3, No 2, https://doi.org/10.1088/2631-8695/ac0777, IOP Publishing
2021
155
Mishra, D., Shree, S., Gupta, A., Priyadarshi, A., Das, S., Pal, S. K., Chakravarty, D., Pal, S., Chattopadhyay, T., Pal, A., “Weld defect localization in friction stir welding process”, Welding in the World, Springer, Accepted on November 18, 2020
2020
154
Kumar, K. Mahumdar, A., Chandra, M. G., Kumar, A., Mishra, D., Pal, S. K., “TransFuse: A Transform Learning based Multi-Sensor Fusion Framework”, IEEE Sensors Letters, IEEE, Accepted on November 11, 2020
2020
153
Sahu, S., Mishra, D., Pal, K., Pal, S. K., “Multi-sensor based strategies for accurate prediction of friction stir welding of polycarbonate sheets”, Proceedings of the Institution of Mechanical Engineers, Part: C Journal of Mechanical Engineering Sciences, Sage Publications, Accepted on August 31, 2020
2020
152
Iqbal, Md P., Vishwakarma, R., Pal, S. K., Mandal, P., “Influence of plunge depth during friction stir welding of aluminum pipes”, Proceedings of the Institution of Mechanical Engineers, Part: B Journal of Engineering Manufacture, Sage Publications, Accepted on July 18, 2020
2020
151
Iqbal, Md P., Tripathi, A., Jain, R., Mahto, R. P., Pal, S. K., Mandal, P., “Numerical modelling of microstructure in friction stir welding of aluminium alloys”, International Journal of Mechanical Sciences, Elsevier Publications, 185, 105882, 2020.
2020
150
Mahto, R. P., Pal, S. K., “Friction Stir Welding of Dissimilar Materials: An Investigation of Microstructure and Nano-Indentation Study”, Journal of Manufacturing Processes, Elsevier Publications, 55, 103-118
2020
149
Sadhu, A., Patrakarmkar, D., Mypati, O., Gopinath, M., Pal, S. K., Nath. A. K., “Performance of additive manufactured Stellite 6 tools in friction stir processing of CuCrZr sheet”, Optics and Laser Technology, Elsevier Publications (Accepted: 22 March 2020).
2020
148
Roy, R. B., Mishra, D., Pal, S. K., Chakravarty, T., Panda S., Chandra M. G., Pal, A., Misra P., Chakravarty, D., Misra S., “Digital twin: current scenario and a case study on a manufacturing process”, The Internal Journal of Advanced Manufacturing Technology, Springer Publications (Accepted: 6 April 2020).
2020
147
Mishra, D., Gupta, A., Raj, P., Kumar, A., Anwer, S., Pal, S. K., Chakravarty, D., Pal, S., Chakravarty, T., Pal, A., Misra, P., Misra, S., “Real time monitoring and control of friction stir welding process using multiple sensors”, CIRP Journal of Manufacturing Science and Technology, Elsevier Publications (Accepted: 16 March 2020).
2020
146
Sadhu, A., Choudhary, A., Sarkar, S., Nair, A. M., Nayak, P., Dadasaheb, P. S., Gopinath, M., Pal, S. K., Nath. A. K., “A study on the influence of substrate pre-heating on mitigation of cracks in direct metal laser deposition of NiCrSiBC-60%WC ceramic coating on Inconel 718”, Surface and Coatings Technology, Elsevier Publications (Accepted: 16 March 2020).
2020
145
Sharma, A., Sharma, V. M., Gugaliya, A., Rai, P., Pal, S. K., Paul, J., “Friction stir lap welding of AA6061 aluminium alloy with a graphene interlayer”, Materials and Manufacturing Processes, Taylor & Francis, (Online: 28 Jan 2020). DOI: 10.1080/10426914.2020.1718694
2020
144
Mahto, R. P., Kumar, R., Pal, S. K., “Characterizations of weld defects, intermetallic compounds and mechanical properties of friction stir lap welded dissimilar alloys”, Materials Characterization, Elsevier Publications, 160, 110115.
2020
143
Sengupta, I., Kumar, S., Pal, S. K., Chakraborty, S., “Characterization of Structural Transformation of Graphene Oxide to Reduced Graphene Oxide during Thermal Annealing”, Journal of Materials Research, (Accepted: 21 February 2020).
2020
142
Mypati, O., Mishra, D., Sahu, S., Pal, S. K., Srirangam, P., “A study on electrical and electrochemical characteristics of Lithium-ion battery tabs for electric vehicles” Journal of Electronic Materials, Springer (Accepted: 09 October 2019).
2020
141div | Rout, M., Singh, S. B., Pal, S. K., “Microstructure and texture evolution in austenitic stainless steel during low strain rate deformation at elevated temperature”, International Journal of Material Forming, Springer (First Online: 23 July 2019).2019
140
Sarkar, I., Priyanka, V., Jha, J. M., Pal, S. K., Chakraborty, S., "Application of binary mixed surfactant additives in jet impingement cooling of a hot steel plate", Heat and Mass Transfer, Springer (First online: 11 June 2019).
2019
139
Iqbal, Md P., Jain, R., Pal, S. K., “Numerical and experimental study on friction stir welding of aluminum alloy pipe” Journal of Materials Processing Technology, Elsevier Publication, 274, 116258.
2019
138
Sengupta. I., Bhattacharya, P., Talukdar, M., Neogi, S., Pal, S. K., Chakraborty, S., “Bactericidal effect of graphene oxide and reduced graphene oxide: Influence of shape of bacteria”, Colloid and Interface Science Communications, Elsevier Publication, 28, 60-68.
2019
137
Sharma, A., Sharma, V. M., Sahoo, B., Pal, S. K., Paul, J., “Effect of multiple micro channel reinforcement filling strategy on Al6061-graphene nanocomposite fabricated through friction stir processing”, Journal of Manufacturing Processes, Elsevier Publications, 37, 53–70.
2019
136
Sharma, V. M., Racherla, V., Pal, S. K., “Synthesis of Open-Cell Copper Foam using Friction Sintering”, The International Journal of Advanced Manufacturing Technology, (First Published May 09, 2019), 1-12.
2019
135
Mypati, O., Sadhu, A., Sahu, S., Mishra, D., Pal, S. K., Singh, S. B., Srirangam, P., “Enhancement of joint strength in friction stir lap welding AA6061 to AISI 304 by adding diffusive coating agents” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Journals (First Published April 26, 2019), 1-14.
2019
134
Kumari S., Jain, R., Kuar, U., Yadav, I., Kumar, N., Kumari, K., Kesharwani R. K., Kumar, S., Pal, S., Pal, S. K., Chakravarty, D., “Defect identification in friction stir welding using continuous wavelet transform”, Journal of Intelligent Manufacturing, Springer, 30(2), 483-494.
2019
133
Mahto, R.P., Gupta, C., Kinjawadekar, M., Meenaa, A., Pal, S. K., “Weldability of AA6061-T6 and AISI 304 by underwater friction stir welding” Journal of Manufacturing Processes, Elsevier Publications, 38, 370–386.
2019
132
Mahto, R. P., Anishetty, S., Sarkar, A., Mypati, O., Pal, S. K., Majumdar, J. D., “Interfacial microstructural and corrosion characterizations of friction stir welded AA6061-T6 and AISI304 materials”, Metal and Material International, Springer, 25( 3), 752–767.
2019
131
Chakraborty, S., Sarkar, I., Roshan, A., Pal, S. K., Chakraborty, S., “Spray cooling of hot steel plate using aqueous solution of surfactant and polymer”, Thermal Science and Engineering Progress, Elsevier Publications, 10, 217-231.
2019
130
Chakraborty, S., Sengupta, I., Sarkar, I., Pal, S. K., Chakraborty, S., “Effect of surfactant on thermo-physical properties and spray cooling heat transfer performance of Cu-Zn-Al LDH nanofluid”, Applied Clay Science, Elsevier Publication 168, 43-55.
2019
129
Sahu, S. K., Mishra, D., Mahto, R. P., Sharma, V. M., Pal, S. K., Pal, K., Banerjee, S., Dash, P., “Friction stir welding of polypropylene sheets”, Engineering Science and Technology, an International Journal, Elsevier Publications, 21(2), 245-254.
2018
128
Sarkar, I., Chakraborty, S., Ashok, A., Sengupta, I., Pal, S. K., Chakraborty, S., “Comparative study on different additives with a jet array on cooling of a hot steel surface”, Applied Thermal Engineering, Elsevier Publications, 137, 154-163.
2018
127
Sarkar, I., Chakraborty, S., Roshan, A., Behera, D. K., Pal, S. K., Chakraborty, S., “Application of TiO2 nanofluid-based coolant for jet impingement quenching of a hot steel plate”, Experimental Heat Transfer, Taylor & Francis, 32(4), 322-336.
2018
126
Sengupta I., Chakraborty S., Talukdar M., Pal S. K., Chakraborty S., “Thermal reduction of graphene oxide: How temperature influences purity” Journal of Materials Research, Cambridge Core, 33(23), 4113-4122.
2018
125
Sharma, A., Sharma, V. M., Mewar, S., Pal, S. K., Paul, J., “Surface modification of Al6061 by graphene impregnation through a powder metallurgy assisted friction surfacing”, Surface and Coatings Technology, Elsevier Publication, 337, 12-23.
2018
124
Sharma, V. M., Racherla, V., Pal, S. K., “Friction sintering of brass powder, Advances in Materials and Processing Technologies, Taylor & Francis Online, 5(1), 95-103.
2018
123
Roy, R. B., Ghosh, A., Bhattacharyya, S., Mahto, R. P., Kumari, K., Pal, S. K., Pal, S., “Weld defect identification in friction stir welding through optimized wavelet transformation of signals and validation through X-ray micro-CT scan”,The International Journal of Advanced Manufacturing Technology, Springer, 99(1–4), 623–633
122
Rout, M., Ranjan, R., Pal, S. K., Singh, S. B., “EBSD study of microstructure evolution during axisymmetric hot compression of 304LN stainless steel: Materials Science & Engineering A, Elsevier Publication, 711, 378-388.
2018
121
Rout, M., Pal, S. K., Singh, S. B., “Prediction of edge profile of plate during hot cross rolling”, Journal of Manufacturing Processes, Elsevier Publication, 31, 301-309.
2018
120
Rout, M., Biswas, S., Ranjan, R., Pal, S. K., Singh, S. B., “Deformation behavior and evolution of microstructure and texture during hot compression of AISI 304LN stainless steel”, Metallurgical and Materials Transaction A, Springer, 49(3), 864-880.
2018
119
Mishra, D., Roy, R. B., Dutta, S., Pal, S. K., Chakravarty, D., “A review on sensor based monitoring and control of friction stir welding process and a roadmap to Industry 4.0”, Journal of Manufacturing Processes, 36, 373-397.
2018
118
Jain, R., Kumari, K., Pal, S. K., Singh, S. B., “Counter rotating twin-tool system in friction stir welding process: a simulation study”, Journal of Materials Processing Technology, Elsevier Publication, 255, 121-128.
2018
117
Jain, R., Pal, S. K., Singh, S. B., “Investigation on effect of pin shapes on temperature, material flow and forces during friction stir welding: A simulation study”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE Journals, First Published October 20, 2019, 1-14.
2018
116
Jain, R., Pal, S. K., Singh, S. B., “Finite element simulation of pin shape influence on material flow and forces in friction stir welding”, International Journal of Advanced Manufacturing Technology, Springer, 94 (5-8), 1781-1797.
2018
115
Mahto, R. P., Kumar, R., Pal, S. K., Panda, S. K., “A comprehensive study on force, temperature, mechanical properties and micro-structural characterizations in friction stir lap welding of dissimilar materials (AA6061-T6 & AISI304)”, Journal of Manufacturing Processes, Elsevier Publications, 31, 624–639.
2018
114
Chauhan, P., Jain, R., Pal, S. K., Singh, S. B., “Modeling of defects in friction stir welding using coupled Eulerian and Lagrangian method”, Journal of Manufacturing Processes, Elsevier Publication, 34( A), 158-166.
2018
113
Chakraborty, S., Sarkar, I., Ashok, A., Sengupta, I., Pal, S. K., Chakraborty S., “Thermo-physical properties of Cu-Zn-Al LDH nanofluid and its application in spray cooling”, Applied Thermal Engineering, Elsevier Publication, 141, 339-351.
2018
112
Chakraborty, S., Sarkar, I., Ashok, A., Sengupta, I., Pal, S. K., Chakraborty, S., “Synthesis of Cu-Al LDH nanofluid and its application in spray cooling heat transfer of a hot steel plate”, Powder Technology, Elsevier Publications, 335, 285-300.
2018
111
Sharma, A., Sharma, V. M., Mewar, S., Pal, S. K., Paul, J., “Friction stir processing of Al6061-SiC-graphite hybrid surface composites”, Materials and Manufacturing Processes, Taylor & Francis Online, 33 (7), 795-804.
2018
110
Sarkar, I., Chakraborty, S., Jha, J. M., Pal, S. K., Chakraborty, S., “Ultrafast cooling of a hot steel plate using Cu-Al layered double hydroxide nanofluid jet”, International Journal of Thermal Sciences, Elsevier Publication, 116, 52-62.
2017
109
Tiara, A. M., Chakraborty, S., Sarkar, I., Pal, S. K., Chakraborty, S., “Effect of alumina nanofluid jet on the enhancement of heat transfer from a steel plate”, Heat and Mass Transfer, Springer, 53 (6), 2187-2197.
2017
108
Tiara, A. M., Chakraborty, S., Sarkar, I., Pal, S. K., Chakraborty, S., “Synthesis and characterization of Zn-Al layered double hydroxide nanofluid and its application as a coolant in metal quenching”, Applied Clay Science, Elsevier Publication, 143, 241-249.
2017
107
Tiara, A. M., Chakraborty, S., Sarkar, I., Ashok, A., Pal, S. K., Chakraborty, S., “Heat transfer enhancement using surfactant based alumina nanofluid jet from a hot steel plate”, Experimental Thermal and Fluid Science, Elsevier Publication, 89, 295-303.
2017
106
Parikh, C., Ranjan, R., Khan, A. R., Jain, R., Mahto, R. P., Chakravarty, D., Pal, S., Pal, S. K., “Volumetric defect analysis in friction stir welding based on three dimensional reconstructed images”, Journal of Manufacturing Processes, Elsevier Publication, 29, 96-112.
2017
105
Jha, J M., Sarkar, I., Pal, S. K., Chakraborty, S., “Heat transfer from a hot moving steel plate by using Cu-Al layered double hydroxide nanofluid based air atomized spray”, Experimental Heat Transfer, Taylor & Francis Online, 30 (6), 500-516.
2017
104
Kesharwani, R. K., Basak, S., Panda, S. K., Pal, S. K., “Improvement in limiting drawing ratio of aluminum tailored friction stir welded blanks using modified conical tractrix die”, Journal of Manufacturing Processes, Elsevier Publication, 28 (1), 137-155.
2017
103
Chakraborty, S., Sarkar, I., Behera, D. K., Pal, S. K., Chakraborty, S., “Experimental investigation on the effect of dispersant addition on thermal and rheological characteristics of TiO2 nanofluid”, Powder Technology, Elsevier Publication, 307, 10-24.
2017
102
Sarkar, I., Behera, D. K., Jha, J. M., Pal, S. K., Chakraborty, S., “Effect of polymer additive on the cooling rate of a hot steel plate by using water jet”, Experimental Thermal and Fluid Science, Elsevier Publication, 70, 105-114.
2016
101
Sahu, P. K., Pal, S., Pal, S. K., Jain, R., “Influence of plate position, tool offset and tool rotational speed on mechanical properties and microstructure of dissimilar Al/Cu friction stir welding joints”, Journal of Material Processing Technology, Elsevier Publications, 235, 55-67.
2016
100
Sahu, P. K., Kumari, K., Pal, S., Pal, S. K., “Hybrid fuzzy-grey-Taguchi based multi weld quality optimization of Al/Cu dissimilar friction stir welded joints”, Advances in Manufacturing, Springer, 4 (3), 237-247.
2016
99
Tiara, A. M., Chakraborty, S., Sarkar, I., Pal, S. K., Chakraborty, S., “Heat transfer in jet impingement on a hot steel surface using surfactant based Cu–Al layered double hydroxide nanofluid”, International Journal of Heat and Mass Transfer, Elsevier Publication, 101, 825-833.
2016
98
Ranjan, R., Khan, A. R., Parikh, C., Jain, R., Mahto, R. P., Pal, S., Pal, S. K., Chakravarthy, D., “Classification and identification of surface defects in friction stir welding : An image processing approach, Journal of Manufacturing Processes, Elsevier Publication, 22, 237-253.
2016
97
Rout, M., Pal, S. K., Singh, S. B., “Finite element simulation of a cross rolling process”, Journal of Manufacturing Processes, Elsevier Publication, 24(1), 283- 292.
2016
96
Jain, R., Pal, S. K., Singh, S. B., “A study on the variation of forces and temperature in a friction stir welding process: A finite element approach”, Journal of Manufacturing Processes, Elsevier Publication, 23, 278-286.
2016
95
Jha, J. M., Ravikumar, S. V., Sarkar I., Pal, S. K., Chakraborty, S., “Jet impingement cooling of a hot moving steel plate: An experimental study”, Experimental Heat Transfer, Taylor & Francis Online, 29(5), 615–631.
2016
94
Jha, J. M., Ravikumar, S. V., Haldar, K., Sarkar, I., Pal, S. K., Chakraborty, S., “Heat transfer from a hot moving steel plate by air-atomized spray impingement”, Experimental Heat Transfer, Taylor & Francis Online, 29(1), 78-96.
2016
93
Mahto, R. P., Bhoje, R., Pal, S. K., Joshi, H. S., Das, S., “A study on mechanical properties in friction stir lap welding of AA 6061-T6 and AISI 304”, Material Science and Engineering: A, Elsevier Publications, 652, 136-144.
2016
92
Dutta, S., Pal, S. K., Sen, R., “Progressive Tool Condition Monitoring of End Milling from Machined Surface Images”, Proceedings of IMechE, Journal of Engg Manufacture, SAGE Publications, 232 (2), 251-266.
2016
91
Dutta, S., Pal, S. K., Sen, R., “On-Machine Tool Prediction of Flank Wear from Machined Surface Images using Texture Analyses and Support Vector Regression”, Precision Engineering, Elsevier Publications, 43, 34-42.
2016
90
Dutta, S., Pal, S. K., Sen, R., “Progressive Tool Flank Wear Monitoring by Applying Discrete Wavelet Transform on Turned Surface Images”, Measurement, Elsevier Publications, 77, 388-401.
2016
892016
Bhat, N. N., Dutta, S., Pal, S. K., Pal, S., “Tool Condition Classification in Turning Process using Hidden Markov Model based on Texture Analysis of Machined Surface Images”, Measurement, Elsevier Publications, 90, 500-509.
2016
88
Bhat, N. N., Dutta, S., Vashists, T., Pal, S., Pal, S. K., Sen, R., “Tool Condition Monitoring by SVM Classification of Machined Surface Images in Turning”, International Journal of Advanced Manufacturing Technology, Springer Verlag, 83 (9-12), 1487-1502.
2016
87
Ravikumar, S. V., Jha, J. M., Haldar, K., Pal, S. K., Chakraborty, S., “Surfactant based Cu-water nanofluid spray for heat transfer enhancement of high temperature steel surface” Journal of Heat Transfer, ASME, 137(5), 051504-051504-8.
2015
86
Ravikumar, S. V., Haldar, K., Chakraborty, S., Jha, J. M., Pal, S. K., Chakraborty, S., “Heat transfer enhancement using air-atomized spray cooling with water-Al2O3 nanofluid”, International Journal of Thermal Sciences, Elsevier, 96, 85-93.
2015
85
Pal, K., Pal, S. K., “Sensor based prediction of weld microstructure in pulsed MIG welding”, International Journal of Microstructure and Materials Properties, Inderscience Publishers, UK, 10 (5-6), 402–434.
2015
84
Mohapatra, S. S., Singh, A., Bhattacharya, C., RaviKumar, S. V., Chakraborty, S., Pal, S. K., “Effect of Oxide Layer in the Ultra-Fast Cooling of a Steel Plate” Experimental Heat Transfer, Taylor Francis Publication, 28 (2), 156–173.
2015
83
Jha, J M, Ravikumar, S V, Sarkar I, Pal, S. K., Chakraborty, S., “Ultrafast cooling processes with surfactant additives for hot moving steel plate”, Experimental Thermal and Fluid Science, Elsevier, 68, 135-144.
2015
82
Jha, J. M., RaviKumar, S. V., Tiara, A. M., Sarkar, I., Pal, S. K., Chakraborty, S., “Ultrafast cooling of a hot moving steel plate by using alumina nanofluid based air atomized spray impingement”, Applied Thermal Engineering, Elsevier, 75, 738-747.
2015
81
Kumar, U., Yadav, I., Kumari, S., Kumari, K., Kumar, N., Kesharwani, R. K., Jain, R., Kumar, S., Pal, S., Chakravarthy, D., Pal, S. K., “Defect identification in friction stir welding using discrete wavelet analysis”, Advances in Engineering Software, Elsevier Publication, 85, 43-50.
2015
80
Kumari, K., Pal, S. K., Singh, S. B., “Friction Stir Welding by using Counter-rotating Twin Tool”, Journal of Material Processing Technology, Elsevier Publications, 215, 132–141.
2015
79
Kesharwani, R. K., Panda, S. K., Pal, S. K., “Experimental Investigations on Formability of Aluminium Tailor Friction Stir Welded Blanks in Deep Drawing Process”, Journal of Materials Engineering and Performance, Springer, 24 (2), 1038–1049
2015
78
Dutta, S., Pal, S. K., Sen, R., “Tool Condition Monitoring in Turning by Applying Machine Vision”, Transactions of ASME, Journal of Manufacturing Science and Engineering, 138 (5), 051008-1-17.
2015
77
Chakraborty, S., Sarkar, I., Haldar, K., Pal, S. K., Chakraborty, S., “Synthesis of Cu-Al Layered Double Hydroxide nanofluid and characterization of its thermal properties”, Applied Clay Science, Elsevier, 107, 98-108.
2015
76
Bhat, N. N., Kumari, K., Dutta, S., Pal, S. K., Pal, S., “Friction Stir Weld Classification by Applying Wavelet Analysis and Support Vector Machine on Weld Surface Images”, Journal of Manufacturing Processes, Elsevier, 20(1), 274-281.
2015
75
Ravikumar, S. V., Jha, J. M., Sarkar, I., Pal, S. K., Chakraborty, S., “ Ultrafast cooling of medium carbon steel strip by air atomized water sprays with dissolved additives”, Ironmaking & Steelmaking, Taylor Francis Publication, 41 (7), 529-538.
2014
74
Ravikumar, S. V., Jha, J. M., Sarkar, I., Pal, S. K., Chakraborty, S., “Enhancement of heat transfer rate in air-atomized spray cooling of a hot steel plate by using an aqueous solution of non-ionic surfactant and ethanol”, Applied Thermal Engineering, Elsevier, 64 (1–2), 64-75.
2014
73
Ravikumar, S. V., Jha, J. M., Mohapatra, S. S., Pal, S. K., Chakraborty, S., “Experimental Investigation of Effect of Different types of Surfactants and Jet height on Cooling of a Hot Steel Plate”, Journal of Heat Transfer, Transactions of ASME Publications, 136 (7), 072102.
2014
72
Ravikumar, S. V., Jha, J. M., Sarkar, I., Pal, S. K., Chakraborty, S., “Mixed-surfactant additives for enhancement of air-atomized spray cooling of a hot steel plate”, Experimental Thermal and Fluid Science, Elsevier, 55, 210-220.
2014
71
RaviKumar, S. V., Jha, J. M., Tiara, A M., Pal, S. K., Chakraborty, S., “Experimental investigation of air-atomized spray with aqueous polymer additive for high heat flux applications”, International Journal of Heat and Mass Transfer, Elsevier, 72, 362–377.
2014
70
Mohapatra, S. S., Srinath, K., Pal, S. K., Chakraborty, S.,“ Enhancement of Cooling Rate for a Hot Steel Plate using Air-Atomized Spray with Surfactant-Added Water,” Experimental Heat Transfer, Taylor Francis Publication, 27(1), 72-90.
2014
69
Mohapatra, S. S., Ravikumar, S. V., Jha, J. M., Singh, A. K., Bhattacharya, C., Pal, S. K., Chakraborty, S., “Ultra-fast cooling of a hot steel plate by air atomized spray with salt solution” , Heat and Mass Transfer, Springer Publication, 50 (5), 587–601
2014
68
Kesharwani, R. K., Panda, S. K., Pal, S. K., “Multi Objective Optimization of Friction Stir Welding Parameters for Joining of Two Dissimilar Thin Aluminium Sheets”, Procedia Materials Science, Elsevier, 6, 178–187.
2014
67
Saha, P., Tarafdar, D., Pal, S. K., Saha, P., Srivastava, A. K., Das, K., “Multiobjective Optimization in wire electro discharge machining of TiC reinforced composite neuro genetic technique”, Applied Soft Computing, Elsevier Science, 13 (4), 2065-2074.
2013
66
Ravikumar, S. V., Jha, J. M., Mohapatra, S. S., Sinha, A., Pal, S. K., Chakraborty, S., “Experimental Study of the Effect of Spray Inclination on Ultrafast Cooling of a Hot Steel Plate”, Heat and Mass Transfer, Springer Publication, 49 (10), 1509-1522.
2013
65
Ravikumar, S. V., Jha, J. M., Mohapatra, S. S., Pal, S. K., Chakraborty, S., “Influence of Ultrafast Cooling on Microstructure and Mechanical Properties of Steel”, Steel Research International, Wiley Publication, 84 (11), 1157-1170.
2013
64
Ravikumar, S. V., Jha, J. M., Sarkar, I., Mohapatra, S. S., Pal, S. K., Chakraborty, S., “Achievement of Ultrafast Cooling Rate in a Hot Steel Plate by Air-atomized Spray with Different Surfactant Additives”, Experimental Thermal and Fluid Science, Elsevier, 50, 79-89.
2013
63
Patra, K., Pal, S. K., Bhattacharyya, K., “Strategies for Intelligent Drill Wear Prediction using Multiple Sensor Signals”, International Journal of Mechatronics and Manufacturing Systems, Inderscience Publishers (UK), 6 (5/6), 493-512.
2013
62
Mohapatra, S S., Ravikumar, S. V., Verma, A., Pal, S. K., Chakraborty, S., “Experimental Investigation of Effect of a Surfactant to Increase Cooling of Hot Steel Plates by a Water Jet”, Journal of Heat Transfer, ASME Publications, 135 (3), 032101-7.
2013
61
Mohapatra, S. S., Ravikuma, S. V., Chakraborty, S., Pal, S. K., “Ultra-Fast Cooling of a Hot Steel Plate by Using High Mass Flux Air Atomized Spray,” Steel Research International, Wiley Publication, 84 (3), 229-236.
2013
60
Mohapatra, S. S., Ravikumar, S. V., Ranjan, R., Pal, S. K., Singh, S. B., Chakraborty, S., “Ultra-Fast Cooling and its Effect on the Mechanical Properties of Steel,” Journal of Heat Transfer, ASME Publications, 136 (3), 032101-9.
2013
59
Datta, A., Dutta, S., Pal, S. K., Sen, R., “Progressive Cutting Tool Wear Detection from Machined Surface Images using Voronoi Tessellation Method”, Journal of Materials Processing Technology, Elsevier, 213 (12), 2339-2349.
2013
58
Dutta, S., Pal, S K., Mukhopadhyay, S., Sen, R., “Application of Digital Image Processing in Tool Condition Monitoring: A Review”, CIRP Journal of Manufacturing Science and Technology (Elsevier), 6 (3), 212-232.
2013
57
Dutta, S., Kanwat, A., Pal, S. K., Sen, R., “Correlation Study of Tool Wear with machined Surface Texture in end Milling”, Measurement (Elsevier), 46 (10), 4249-4260.
2013
56
Mohapatra, S. S., Chakraborty, S., Pal, S. K., “Experimental studies on different cooling processes to achieve ultra-fast cooling rate for hot steel plate”, Experimental Heat Transfer, Taylor Francis, 25 (2), 111-126.
2012
55
Mohapatra, S.S., Ravikumar, S. V., Andhare S. K., Chakraborty, S., Pal, S. K., “Experimental study and optimization of air atomized spray with surfactant added water to produce high cooling rate”, Journal of Enhanced Heat Transfer, Begell House Publications, 19 (5), 397-408.
2012
54
Datta, A., Samik D., Mukherjee, S., Sen, R., and Pal, S. K., “Texture Analysis of Turned Surface Images using Grey Level Co-occurrence Technique”, Advance Materials Research, 365, 38-43.
2012
53
Dutta, S., Datta, A., Das, C. N., Pal, S. K., Mukhopadhyay, S., Sen, R., “Detection of Tool Condition from the Turned Surface Images using an Accurate Grey Level Co-occurrence Technique”, Precision Engineering, Elsevier Publications, 36 (3), 458-466.
2012
52
Das, C. N., Pal, S. K., Mandal, P., “Drilling of woven glass fiber reinforced plastic – an experimental and finite element study”, International Journal of Advanced Manufacturing Technology, Springer Verlag, 58(1-4), 267-278.
2012
51
Chatterjee, S., Chatterjee, R., Pal, S., Pal, K., Pal, S. K., “Adaptive chirplet transform for sensitive and accurate monitoring of pulsed gas metal arc welding process”, International Journal of Advanced Manufacturing Technology, Springer Verlag, 60 (1-4), 111-125.
50
Bhattacharya, S., Pal, K., Pal, S. K., “Multi-Sensor based prediction of metal deposition in pulsed gas metal arc welding using various soft computing models”, Applied Soft Computing, Elsevier Publications, 12(1), 498-505.
2012
49
Pal, S., Heyns, P. S., Freyer, B.H., Theron, N. J., Pal, S. K., “Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties”, Journal of Intelligent Manufacturing, Springer Verlag, 22(4), 491-504.
2011
48
Priyadarshini, A., Pal, S. K., Samantaray, A. K., “A Finite Element Study of Chip Formation Process in Orthogonal Machining”, International Journal of Manufacturing, Materials and Mechanical Engineering, IGI Global, 1(4), 19-45.
2011
47
Priyadarshini, A., Pal, S. K., Samantaray, A. K., “Influence of the Johnson Cook Material Model Parameters and Friction Models on Simulation of Orthogonal Cutting”, International Journal of Machining and Forming Technologies, Nova Science, USA, 4 (1-2), 59-83.
2011
46
Pal, K., Pal, Surjya K., “Monitoring of weld penetration using arc acoustics”, Materials and Manufacturing Processes, Taylor & Francis, 26, 684-693.
2011
45
Pal, K., Pal, S. K., “Soft Computing Methods used for the modelling and Optimization of gas metal arc welding: a review”, International Journal of Manufacturing Research, Inderscience Publications, 6(1), 15-29.
2011
44
Pal, K., Pal, S. K., “Effect of pulse parameters on weld quality in pulsed gas metal arc welding: a review”, Journal of Materials Engineering and Performance, Springer Verlag, 20(6), 918-931.
2011
43
Pal, K., Bhattacharya, S., Pal, S. K., “Optimization of weld deposition efficiency in pulsed MIG welding using hybrid neuro-based techniques” International Journal of Computer Integrated Manufacturing, Taylor & Francis, 24(3), 198-210.
2011
42
Priyadarshini, A., Pal, S. K., Samantaray, A. K., “Finite element study of serrated chip formation and temperature distribution in orthogonal machining”, International Journal of Mechatronics and Intelligent Manufacturing, Nova Science Publishers, 2 (1-2), 53-72.
2010
41
Patra, K., Pal, S. K., Bhattacharyya, K., “Fuzzy radial basis function (FRBF) network based tool condition monitoring using vibration signals”, Machining Science and Technology, Taylor & Francis, 14 (2), 280-300.
2010
40
Pal, S., Pal, S. K., and Samantaray, A. K., “Determination of optimal pulse metal inert gas welding parameters with a neuro-GA technique”, Materials and Manufacturing Processes, Taylor & Francis, 25 (7), 606-615.
2010
39
Pal, K., Bhattacharya, S., Pal, S. K., “Multisensor-based monitoring of weld deposition and plate distortion for various torch angles in pulsed MIG welding”, International Journal of Advanced Manufacturing Technology, Springer-Verlag London, 50 (5-8), 543-556.
2010
38
Pal, S., Pal, S. K., Samantaray, A. K., “Prediction of the quality of pulsed metal inert gas welding using statistical parameters of arc signals in artificial neural network”, International Journal of Computer Integrated Manufacturing, Taylor & Francis, 23 (5), 453-465.
2010
37
Pal, K., Pal, S. K., “Sensor based characterization of weld quality and process stability monitoring in pulsed MIG welding”, Journal of Mechatronics and Intelligent Manufacturing, Nova Science Publishers, 2 (1-2), 5-16.
2010
36
Pal, K., Bhattacharya, S., Pal, S. K., “Investigation on arc sound and metal transfer modes for on-line monitoring in pulsed gas metal arc welding”, Journal of Materials Processing Technology, Elsevier Publications, 210 (10), 1397-1410.
2010
35
Pal, K., Pal, S. K., “Study of weld joint strength using sensor signals for various torch angles in pulsed MIG welding”, CIRP Journal of Manufacturing Science and Technology, Elsevier Publications, 3 (1), 55-65.
2010
34
Garg. S., Patra, K., Khetrapal, V., Pal, S. K., Chakraborty, D., “Genetically evolved radial basis function network based prediction of drill flank wear”, Engineering Applications of Artificial Intelligence, Elsevier Publications, 23, 1112-1120.
2010
33
Ghosh, S. K., Pal, S., Roy, S. K., Pal, S. K., Basu, D., “Modelling of the flame temperature of solution combustion synthesis of nanocrystalline calcium hydroxyapatite material and its parametric optimization”, Bulletin of Materials Science, Springer, 33 (4), 339-350.
2010
32
Saha, P., Tarafdar, D., Pal, S. K., Saha, P., Srivastava A. K., Das, K., “Modeling of wire-electro-discharge machining of TiC/Fe in-situ metal matrix composite using normalized RBFN with enhanced k-means clustering technique”, International Journal of Advanced Manufacturing Technology, Springer-Verlag 43 (1-2),107-116.
2009
31
Patra, K., Pal, S. K., Bhattacharyya, K., “Application of wavelet packet transform based normalized radial basis function network in a machining process”, International Journal of Materials and Product Technology, Special issue on “Intelligent Machining – Computational Methods and Optimisation”, Inderscience Publishers, 35 (1/2), 184-198.
2009
30
Patra, K., Bhattacharyya, K., Pal, S. K., “Neural network based prediction of drill wear from theoretically analyzed and experimentally measured values of thrust force and torque”, International Journal of Machining and Machinability of Materials, Inderscience Publishers, 5 (2/3), 207 – 231.
2009
29
Pal, K., Bhattacharya, S., Pal, S. K., “Prediction of metal deposition from arc sound and weld temperature signatures in pulsed MIG welding”, International Journal of Advanced Manufacturing Technology, Springer-Verlag, 45, 1113-1130.
2009
28
Raghavendra N., Koranne, R., Patra, K., Pal, S. K., “A neuro ant colony optimized model for drill flank wear prediction”, International Journal for Manufacturing Sciences & Production, Freund Publishing House, Israel, 10 (3-4), 169-184.
2009
27
Pal, S., Malviya, S. K., Pal, S. K., Samantaray, A. K., “Optimization of quality characteristics parameters in a pulsed metal inert gas welding process using grey-based Taguchi method”, International Journal of Advanced Manufacturing Technology, Springer-Verlag, 44, 1250-1260.
2009
26
Raghavendra, N. Koranne, R., Pal, S., Pal, S. K., Samantaray, A. K., “Joint strength prediction in a pulsed MIG welding process using hybrid neuro ant colony-optimized model”, International Journal of Advanced Manufacturing Technology, Springer-Verlag, 41 (7-8), 694-705.
2009
25
Saha, P, Singha, A., Pal, S. K., Saha, P., “Soft computing models based prediction of cutting speed and surface roughness in wire electro-discharge machining of tungsten carbide cobalt composite”, International Journal of Advanced Manufacturing Technology, Springer-Verlag (London), 39 (1-2), 74-84.
2008
24
Panda, S. S., Chakraborty, D., Pal, S. K., “Flank wear prediction in drilling using back propagation neural network and radial basis function network”, Applied Soft Computing, Elsevier Publications, 8 (2), pp. 858-871.
2008
23
Panda, S. S., Chakraborty, D., Pal, S. K., “Drill wear prediction using different neural network architectures”, International Journal of Knowledge-Based and Intelligent Engineering Systems, IOS Press, 12 (5-6), 327-338.
2008
22
Pal, S., Pal, S. K., Samantaray, A. K., “Sensor based weld bead geometry prediction in pulsed metal inert gas welding process through artificial neural networks”, International Journal of Knowledge-Based and Intelligent Engineering Systems, IOS Press, 12 (2), 101-114.
2008
21
Pal, S., Pal, S. K., Samantaray, A. K., “Artificial neural network modeling of weld joint strength prediction of a pulsed metal inert gas welding process using arc signals”, Journal of Materials Processing Technology, Elsevier Publications, 202 (1-3), 464-474.
2008
20
Pal, S., Pal, S. K., Samantaray, A. K., “Neurowavelet packet analysis based on current signature for weld joint strength prediction in a pulsed metal inert gas welding process”, Science and Technology of Welding and Joining, Maney Publisher, 13 (7), 638-645.
2008
19
Mandal, M., Pal, S. K., “Pseudo-bond graph modelling of temperature distribution in a through-process steel rolling”, Mathematics and Computers in Simulation, Elsevier Publications, 77 (1), 81-95.
2008
18
Garg. S., Patra, K., Pal, S. K., Chakraborty, D., “Effect of different basis functions on a radial basis function network in prediction of drill flank wear from motor current signals”, Soft Computing, Springer-Verlag Publications, 12 (8), 777-787.
2008
17
Panda, S. S., Chakraborty, D., Pal, S. K., “Monitoring of drill flank wear using fuzzy back-propagation neural network”, International Journal of Advanced Manufacturing Technology, Springer-Verlag (London), 34 (3-4), 227-235.
2007
16
Patra, K., Pal, S. K., Bhattacharyya, K., “Artificial neural network based prediction of drill flank wear from motor current signals”, Applied Soft Computing Journal, Elsevier Publications, 7, 929-935.
2007
15
Patra, K., Pal, S. K., Bhattacharyya, K., “Application of wavelet packet analysis in drill wear monitoring”, Machining Science and Technology, Taylor & Francis Group, 11 (3), 413-432.
2007
14
Pal, S. K., Talamantes-Silva, J., Linkens, D. A., Howard, I. C., “Bond graph and finite element analysis of temperature distribution in a hot rolling process: a comparative study”, Journal of Systems and Control Engineering (Proceedings of the IMechE, Part I), SAGE Journals, 221 (I), 653-661.
2007
13
Pal, S., Pal, S. K., Samantaray, A. K., “Radial basis function neural network model based prediction of weld plate distortion due to pulsed metal inert gas welding”, Science and Technology of Welding and Joining, Taylor & Francis, 12 (8), 725-731.
2007
12
Mandal, M., Pal, S. K., “Bond graph modelling of temperature distribution in a steel plate during multi-stand rolling”, International Journal of Materials and Product Technology, Inderscience Publishers (UK), 30 (4), 370-385.
2007
11
Garg, S., Pal, S. K., Chakraborty, D., “Evaluation of the performance of backpropagation and radial basis function neural networks in predicting the drill flank wear”, Neural Computing and Applications, Springer-Verlag (London), 16, 407-417.
2007
10
Mandal, D., Pal, S. K., Saha, P., “Modeling of electrical discharge machining process using back propagation neural network and multi-objective optimization using non-dominating sorting genetic algorithm-II”, Journal of Materials Processing Technology, Elsevier Publications, 186 (1-3), 154-162.
2007
9
Mandal, D., Pal, S. K., Saha, P., “Back propagation neural network based modeling of multi-responses of an electrical discharge machining process”, International Journal of Knowledge-Based and Intelligent Engineering Systems, IOS Press, 11 (2), 381-390.
2007
8
Singh, A. K., Panda, S. S., Pal, S. K., Chakraborty, D., “Predicting drill wear using artificial neural network”, International Journal of Advanced Manufacturing Technology, Springer-Verlag (London), 28, 456-462.
2006
7
Panda, S. S., Singh, A. K., Chakraborty, D., Pal, S. K., “Drill wear monitoring using back propagation neural network”, Journal of Materials Processing Technology, Elsevier Publications, 172, 283-290.
2006
6
Pal, S. K., Chakraborty, D., “Surface roughness prediction in turning using artificial neural network”, Neural Computing and Applications, Springer-Verlag (London), 14 (4), 319-324.
2005
5
Pal, S. K., Linkens, D. A., “Bond graph modelling and simulation of static recrystallization kinetics in multipass hot steel rolling”, Computer, Materials and Continua, Tech Science Press (USA), 2 (2), 113-118.
2005
4
Bisht, H., Gupta, J., Pal, S. K., Chakraborty, D., “Artificial neural network based prediction of flank wear in turning”, International Journal of Materials and Product Technology, Inderscience Publishers (UK), 22 (4), 328-338.
2005
3
Pal, S. K., Mukherjee, A., Karmakar, R., “Modelling of thermometallurgical process in a runout table, part 1: a bond graph approach”, International Journal of Modelling and Simulation, ACTA Press (USA), 22 (1), 39-46.
2002
2
Pal, S. K., Mukherjee, A., Karmakar, R., “Modelling of thermometallurgical process in a runout table, part 2: simulation studies on eutectoid and 1025 carbon steel”, International Journal of Modelling and Simulation, ACTA Press (USA), 22 (2), 77-85.
2002
1
Pal, S. K., Linkens, D. A., “Temperature distribution in steel during hot rolling: pseudo-bond graph view”, Simulation Modelling Practice and Theory, Elsevier Publication, 10, 69-85.
2002

Book Chapters : 15

#TitleYear
15
Sarkar P., Pal S.K., Bhattacharya A., Shollock B. (2021) An Application from a Defect—A Friction Stir Channeling Approach. In: Davim J.P. (eds) Welding Technology. Materials Forming, Machining and Tribology. Springer, Cham. https://doi.org/10.1007/978-3-030-63986-0_4
2021
14
Sahu S., Pal S.K., Shome M., Srirangam P. (2021) Welding of Dissimilar Metals—Challenges and a Way Forward with Friction Stir Welding. In: Davim J.P. (eds) Welding Technology. Materials Forming, Machining and Tribology. Springer, Cham. https://doi.org/10.1007/978-3-030-63986-0_5
2021
13
Nayak S.S., Mahto R.P., Pal S.K., Srirangam P. (2021) Microstructure and Texture in Welding: A Case Study on Friction Stir Welding. In: Davim J.P. (eds) Welding Technology. Materials Forming, Machining and Tribology. Springer, Cham. https://doi.org/10.1007/978-3-030-63986-0_6
2021
12
Sen D., Pal S.K., Panda S.K. (2021) Tubular Structures: Welding Difficulty and Potential of Friction Stir Welding. In: Davim J.P. (eds) Welding Technology. Materials Forming, Machining and Tribology. Springer, Cham. https://doi.org/10.1007/978-3-030-63986-0_7
2021
11
Mishra D., Pal S.K., Chakravarty D. (2021) Industry 4.0 in Welding. In: Davim J.P. (eds) Welding Technology. Materials Forming, Machining and Tribology. Springer, Cham. https://doi.org/10.1007/978-3-030-63986-0_8
2021
10
Mishra, D., Sahu, S.K., Mahto, R.P., Pal, S.K., Pal, K., “Friction stir welding for joining of polymers. In: Dixit U., Narayanan R. (eds), Strengthening and Joining by Plastic Deformation. Lecture Notes on Multidisciplinary Industrial Engineering, Springer, 123-162.
2019
9
Jain, R., Pal, S. K., Singh, S. B., “Thermomechanical simulation of friction stir welding process using lagrangian method”, Simulation for Design and Manufacturing, Springer, 103-146.
2018
8
Joshi, H. S., Pal, S. K., Chakraborty, G., “Study on the delamination of GFRP composites in drilling: A finite element model”, Simulation for Design and Manufacturing, Springer, 1-43.
2018
7
Jain, R., Pal, S. K., Singh, S. B., “Numerical modeling methodologies for friction stir welding process”, Computational Methods and Production Engineering, Woodhead Publishing (Elsevier), 125-168.
2017
6
Rout, M., Pal, S. K., Singh, S. B., “Finite element modeling of hot rolling: Steady- and unsteady-state analyses”, Computational Methods and Production Engineering, Woodhead Publishing (Elsevier), 83-124.
2017
5
Sardar, S., Mandal, A., Pal, S. K., Singh, S. B., “Solid-State Joining by Roll Bonding and Accumulative Roll Bonding”, in Advances in Material Forming and Joining, Springer, 351-377.
2015
4
Rout, M., Pal, S. K., Singh, S. B., “Cross rolling: A metal forming process”, Modern Manufacturing Engineering: Research, Development and Education, Springer, 41-64.
2015
3
Jain, R., Kumari, K., Kesharwani, R., Kumar, S., Pal, S. K., Singh, S. B., Panda, S. K., Samantaray, A. K., “Frictions stir welding: scope and recent development”, Modern Manufacturing Engineering: Research, Development and Education, Springer, 179-229.
2015
2Dutta, S., Pal, S. K., Sen, R., “Digital image processing in machining”, Modern Mechanical Engineering, Springer, 367-410.2014
1
Priyadarshini, A, Pal, S. K., Samantaray, A. K., “Finite element modeling of chip formation in orthogonal machining”, Statistical and Computational Techniques in Manufacturing, Springer, 101-144.
2012

National Journal : 4

#TitleYear
4
Pal, K., Pal, S. K., “Multiobjective optimization of pulsed gas metal arc welding process using neuro-NSGA-II”, Journal of the Institution of Engineers (India): Series C, Springer, (https://doi.org/10.1007/s40032-018-0466-2).
2018
3
Rout, M., Pal, S. K., Singh, S. B., “Finite element analysis of cross rolling on AISI 304 stainless steel: prediction of stress and strain fields”, Journal of the Institution of Engineers (India): Series C, Springer, 98(1), 27-35.
2017
2
Jain, R., Pal, S. K., Singh, S. B., “Finite element simulation of temperature and strain distribution during friction stir welding of AA2024 aluminum alloy”, Journal of the Institution of Engineers (India): Series C, Springer, 98(1), 37-43.
2017
1
Garg. S., Patra, K., Pal, S. K., “Particle Swarm Optimization of a Neural Network Model in a Machining Process”, Sadhana, Springer, 39 (3), 533–548.
2014

Conference : 97


International
#TitleYear
78
Banerjee, A., Pal, O., Mondal, M., Mukherjee, A., Chakrabarti, P.P., Pal, S. K., Misra, S., Chakravarty, D., “An Effective EEG-based Image Classification Methodology under Low Data and Resource Requirements Using Machine Learning”, IEEE-International Conference on Computer, Electrical & Communication Engineering 2024, IEEE.
2024
77
Tapwal, R., Mishra, S., Pal, S. K., “Reclaiming Control: Blockchain-Powered Social Network Data Management for Global Connectivity”, IEEE ICC 2024, Denver, USA, IEEE, 2024.
2024
76
Das, A., Agarwal, A., Kundoliya, N., Dutta, A., Pal, S. K., Kumar, R., “Condition monitoring of industrial exhaust motor-fan assembly using statistical feature optimization with nature-inspired optimizers”, 3rd International Conference on Control, Instrumentation, Energy & Communication (CIEC), University of Calcutta, IEEE, 2024.
2024
75
Agarwal, A., Das, A., Mondal, K., Dutta, A., Pal, S. K., Kumar, R., Appukuttan, A.P., Mallarapu, S., “An integrated system using real-time sensor data and cloud technology for vibration analysis in industrial machine health monitoring” Proceedings of the XVIII Vibration Engineering & Technology of Machinery Conference (VETOMAC), Indian Institute of Technology Roorkee, Uttarakhand, 2023.
2023
74
Sen, D., Pal, S. k., Panda, S. K., “Optimisation of process parameters to fabricate tubular components of AA5083-O alloy using friction stir welding for crashworthiness applications”, All India Manufacturing Technology, Design, and Research Conference (AIMTDR), IIT Roorkee, 2023.
2023
73
Mondal, M., Pal, O., Halder, T., Mukherjee, A., Nayak, P., Pal, S. K., Chakravarty, D., Misra, S., “EEG-based Color Classification for Industry 4.0 Applications”, All India Manufacturing Technology, Design, and Research Conference (AIMTDR), IIT Roorkee, 2023.
2023
72
Hoang, D., Chen, R., Mishra, D., Pal, S. K., Imani, F., “Data fusion cognitive computing for characterization of mechanical property in friction stir welding process”, Proceedings of the ASME 2023, International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC-CIE 2023, August 20–23, 2023, Boston, MA IDETC-CIE2023-117184.
2023
71
Tapwal, R., Misra, S., Pal, S. K., “CartelChain: A Secure Communication Mechanism for Heterogeneous Blockchains”, IEEE International Conference on Communications.
2022
70
Mishra, D., Pal, S. K., Chakravarty, D., “Tool quality monitoring in friction stir welding process", 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM 2019), IIT Mandi, 2019.
2019
69
Mypati, O., Pal, S. K., Srirangam, P. “A study on electrical conductivity of micro friction stir-welded dissimilar sheets for hybrid electric vehicles (HEVs)”, The Minerals, Metals & Materials Series (eds) TMS 148th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer.
2019
68
Sahu S., Thorat O., Mahto R.P., Pal S.K., Srirangam P. (2019) “A review and case study on mechanical properties and microstructure evolution in magnesium–steel friction stir welding”. Joshi V., Jordon J., Orlov D., Neelameggham N. (eds), Magnesium Technology 2019, The Minerals, Metals & Materials Series. Springer
2019
67
Sharma, V. M., Racherla, V., Pal, S. K., “Fabrication of copper foam plate using friction sintering”, ASME 2019 14th International Manufacturing Science and Engineering Conference, June 10-14, 2019, Erie, PA, USA.
2019
66
Mahto, RP, Pal, S. K., “A Nano-Indentation study on Intermetallic compound in Friction Stir Welding of AA6061-T6 and AISI304”, 40th International MATADOR Conference on Advanced Manufacturing, Hangzhou, China
2019
65
Sharma, V. M., Racherla, V., Pal, S. K., “Fabrication of large copper foam plates using friction sintering: Effect of tool traverse speed”, 40th International MATADOR Conference on Advanced Manufacturing, Hangzhou, China, (Accepted for publication).
2019
64
Iqbal, Md P, Vishwakarma, Ranjan K., Pal, S. K., Mandal, P., "Friction stir welding of aluminum pipes: a study on the variation of force, torque, power, and temperature" 40th International MATADOR Conference on Advanced Manufacturing, Hangzhou, China, (Accepted for publication).
2019
63
Mypati, O., Sadhu, A., Sahu, S., Mishra, D., Pal, S. K., “Formation of kamacite (Fe, Ni) to increase the mechanical strength of friction stir lap welding of aluminium to steel aided with coating”, 7th Asia Steel International Conference, Bhubaneswar, Odisha.
2018
62
Sahu, S., Mypati, O., Pal, S. K., Singh, S. B., “Effect of tool geometry on weld strength and hardness in friction stir lap welding of dissimilar materials”, 7th Asia Steel International Conference, Bhubaneswar, Odisha.
2018
61
Mahto, R. P., Gaikwad, J., Kumar, R., Pal, S. K.; “Friction stir lap welding of AA6061-T6 and AISI304: Mechanical and metallurgical properties of stir zone”, 7th Asia Steel International Conference, Bhubaneswar, Odisha.
2018
60
Rout, M., Singh, S. B., Pal, S. K., “Study on static recrystallisation behaviour of 304ln stainless steel by two-stage compression test”, 7th Asia Steel International Conference, Bhubaneswar, Odisha.
2018
59
Sengupta I., Talukdar, M., Pal, S. K., Chakraborty S., “Modified synthesis and reduction of graphene oxide by thermal treatment”, MRS Spring Meeting and Exhibit 2018, Phoenix, Arizona, USA.
2018
58
Talukdar, M., Sengupta I., Pal, S. K., Chakraborty S., “Characterization of thermo physical properties of graphene oxide and reduced graphene oxide nanofluids”, MRS Spring Meeting and Exhibit 2018, Phoenix, Arizona, USA.
2018
57Mishra, D., Basu Roy, R., Dutta, S., Pal S. K., Chakravarty D., “Concept of industry 4.0 in friction stir welding”, Industry 4.0 summit.2018
56
Mahto, R. P., Pal, S. K., “Friction stir lap welding of thin AA6061-T6 and AISI304 sheets at different values of pin penetrations”, ASME 2018 13th International Manufacturing Science and Engineering Conference.
2018
55
Sharma, V. M., Maity, D., Racherla, V., Pal, S. K., “Friction sintering of copper powder using a new rapid, cost effective and energy efficient process”, ASME 2018 13th International Manufacturing Science and Engineering Conference.
2018
54
Sahu, S., Mypati, O., Nayak, S. S., Sarkar, P., Pal, S. K. Singh, S. B., “Friction stir welding for joining of dissimilar materials”, 7th International and 28th All India Manufacturing Technology, Design and Research Conference, Anna University, Chennai.
2018
53
Mahto, RP, Kinjawadekar, M., Gupta, C., Pal, S. K., “Effect of pin diameter in underwater friction stir lap welding of dissimilar materials: AA6061-T6 & AISI 304”, 7th International and 28th All India Manufacturing Technology, Design and Research Conference, Anna University, Chennai.
2018
52
Sarkar, I., Pal, S. K., Chakraborty S. “Synthesis of titanium dioxide nanofluid and application in jet impingement cooling in steel industries”, ACS 254th National Meeting and Exposition.
2017
51
Sahu, S. K., Panda, M., Mahto, R. P., Pal, S. K., Pal, K., Das, P., “Experimental investigation to join Al 6063 alloy to polypropylene using friction stir welding”, Proceedings of the 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 10), 727-731.
2017
50
Kumari, K., Mishra, D., Pal, S. K., “Effect of process parameters on the evolution of residual stress in friction stir welding with counter-rotating twin tool”, International Conference on Advanced Materials and Processing Technologies (AMPT-2017), VIT Chennai.
2017
49
Jain, R., Pal, S. K., Singh, S. B., “Simulation of material flow in friction stir welding”, Proceedings of the International Conference on Advances in Materials and Manufacturing, (ICAMM), Hyderabad, 51-56.
2016
48
Rout, M., Pal, S. K., Singh, S. B., Biswas, S. “Evolution of microstructure and texture in 304 austenitic stainless steel by two different modes of hot rolling”, Proceedings of the International Conference on Advances in Materials and Manufacturing, (ICAMM), Hyderabad, 411- 416.
2016
47
Jain, R., Pal, S. K., Singh, S. B., “A coupled thermo-mechanical model to predict forces, temperature and material flow in friction stir welding”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), CoE, Pune, 1892-1895.
2016
46
Rout, M., Ranjan, R., Pal, S. K., Singh, S. B., “Study on static recrystallisation behaviour of 304LN stainless steel by two-stage compression test”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), CoE, Pune, 1007- 1011.
2016
45
Kumari, K., Mahto, R. P., Pal, S. K., Singh, S. B., “Comparative study on effect of counter rotating twin tool and single tool on temperature rise during friction stir welding”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), CoE, Pune, 679-682.
2016
44
Joshi, H. S., Pal, S. K., Chakraborty, G., “Study on the delamination of GFRP composites in drilling-A finite element model”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), CoE, Pune, 1879-1883.
2016
43
Sahu, S. K., Mishra, D., Mahto, R. P., Pal, S. K., Pal, K., “Friction stir welding of HDPE sheets-A study on the effect of rotational speed”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), CoE, Pune, 1065-1068.
2016
42
Sarkar, I., Pal, S. K., Chakraborty S., “Heat transfer enhancement from a hot steel plate using Triton X-100 Surfactant Additive in water jet”, AICHE Annual Meeting.
2016
41Chakraborty S, Pal, S. K., Chakraborty S., “Spray cooling of hot steel plate using water based TiO2 nanofluid”, AICHE Annual Meeting, 2016.2016
40
Rout, M., Krishna, K. S., Pal, S. K., Singh, S. B., “Experimental study of plastic anisotropy in hot cross rolling”, 2nd International Conference on Rolling & Finishing Technology of Steel, SAIL, RDCIS, Ranchi, India, Iron & Steel Review, 59(4), 155-158.
2015
39
Kesharwani, R., Panda, S. K., Pal, S. K., “Multi objective optimization of friction stir welding parameters for joining of two dissimilar thin aluminum sheets” 3rd International Conference on Material Processing and Characterization (ICMPC), GRIET Hyderabad.
2014
38
Jain, R., Pal, S. K., Singh, S. B., “Finite element simulation of temperature distribution and stress variation in aisi 1040 steel by friction stir welding process”, 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR), IIT Guwahati.
2014
37
Sardar, S., Mandal, A., Pal, S. K., Singh, S. B., “Accumulative roll bonding of aa6005 and aa1060 metal strip: Study on microstructure, mechanical properties and minimum bonding criteria”, 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR), IIT Guwahati.
2014
36
Kumari, K., Pal, S. K., “Study on the novel twin-tool system in friction stir welding process”, 5th International and 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR), IIT Guwahati.
2014
35
Rout, M., Pal S. K., Singh, S. B., “Numerical simulation of temperature field of aisi 316L stainless steel during cross rolling”, Proceedings of the International Conference on Innovation in Design, Manufacturing and Concurrent Engineering, (IDMC), NIT Rourkela, 81.
2014
34
Rout, M., Pal S. K., Singh, S. B., “Finite element analysis of cross rolling on aisi 304 stainless steel: prediction of stress and strain fields”, Proceedings of the 5th International and 26th All India Manufacturing Technology, Design and Research Conference, (AIMTDR), IIT Guwahati, 487-1.
2014
33
Kumari K., Pal, S. K., “Friction stir processing of al alloy by using twin tool”, International Colloquim on Materials, Manufacturing, and Metrology, (ICMMM) IIT Madras.
2014
32
Kumari K., Pal, S. K., Singh S.B.,”Novel concept of twin-tool in friction stir welding: A study on hardness of non-heat treated and heat treated commercial pure al alloys”, International Conference on Friction Based Processes, (ICFP), IISc Bangalore.
2014
31
Jain, R., Pal, S. K., Singh, S. B., “Finite element simulation of effect of process parameters on forces and spindle torque in friction stir welding”, International Conference on Friction Based Processes, (ICFP), IISc, Bangalore.
2014
30
Chatterjee, S., Chatterjee, R., Pal, S., Pal, K., Pal, S. K., “Accurate detection of weld defects using chirplet transform”, 4th International Conference on Computer and Automation Engineering (ICCAE), Mumbai, India.
2012
29
Joshi H. S., Pal S. K., Chakraborty, G., Mandal P. S., “Estimation of thrust force using finite element analysis during drilling of GFRP composites”, International Conference on Global Technology Initiatives, Mumbai, India
2012
28
Pal, K., Pal, S. K., “Multi-sensor based prediction of weld quality characteristics in pulsed GMAW using artificial neural network”, 4th International and 25th All India Manufacturing Technology, Design and Research Conference (AIMTDR), Jadavpur University.
2012
27
Mohapatra, S. S., Palleti, V. R., Chakraborty, S., Pal, S. K., “Experimental study of ultra-fast cooling of a hot steel plate by air-assisted spray at high mass flux” International Conference on Advanced in Materials and Materials Processing (ICAMMP), IIT Kharagpur, India, 32.
2011
26
Datta, A., Dutta, S., Pal, S. K., Sen, R., Mukhopadhyay, S., “Texture analysis of turned surface images using grey level co-occurrence technique”, International Conference of Future Materials Engineering and Industrial Applications (ICFMEIA), Bali, Indonesia.
2011
25
Saha, P., Pal, S.K., Saha, P., “Parametric optimization in wedm of wc-co composite by neuro-genetic technique”, Proc. of the International Conference on Mechanical Engineering, Imperial College, London, 2204-2209.
2011
24
Ravi Shankar, S. N., Pal, S. K., Samantaray A. K., “Drilling of glass fibre reinforced plastic (GFRP) composite: experimental investigation on effects of process parameters”, International Conference on Advances in Mechanical Engineering (ICMAE), S.V. National Institute of Technology, Surat.
2010
23
Ghosh, M., Das, D., Mandal, S., Chakraborty, C., Pal, M., Maity, A., Pal, S. K., Ray, A. K., “Statistical pattern analysis of white blood cell nuclei morphometry”, IEEE Students’ Technology Symposium, IIT Kharagpur.
2010
22
Patra, K., Pal, S. K., Bhattacharyya, K., “Strategies for intelligent tool wear prediction in a machining process”, 23rd International congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM), 623-626, Nara, Japan.
2010
21
Pal, K., Pal, S. K., “Modeling and control of a gas metal arc welding process using soft computing tools and sensor signals: A review”, International Conference Emerging Research and Advances in Mechanical Engineering (ERA), Chennai.
2009
20
Priyadarshini, A., Pal, S. K., Samantaray, A. K., “Estimation of heat generation and cutting tool temperature in orthogonal machining: A review”, International Conference Emerging Research and Advances in Mechanical Engineering (ERA), Chennai.
2009
19
Ravishankar, S. N., Pal, S. K., Samantaray A. K., “Drilling of glass fibre reinforced plastics: A review”, International Conference Emerging Research and Advances in Mechanical Engineering (ERA), Chennai.
2009
18
Priyadarshini, A., Pal, S. K., Samantaray, A. K., “Finite element study of serrated chip formation”, International Conference on Advances in Mechanical Engineering (ICMAE), S.V. National Institute of Technology, Surat.
2009
17
Pal, K., Pal, S. K., “Characterization of weld quality and process stability in pulsed MIG welding using sensor signals”, International Conference on Advances in Mechanical Engineering (ICMAE), S.V. National Institute of Technology, Surat, 1019-1023.
2009
16
Sannapureddy, H., Priyadarshini, A., Pal, S. K., “Finite element modeling of turning operation: study on the effect of cutting velocity and feed on cutting and thrust force”, International Conference on Advances in Mechanical and Building Sciences (ICAMB), V.I.T University, Vellore, Tamil Nadu.
2009
15
Garg, S., Chakraborty D., Deb, S., Pal, S. K., “A neuro-memetic model for the prediction of drill flank wear”, International Conference on Advances in Manufacturing and Technology Management (ICAMTM), Mumbai, India, 9-15.
2007
14
Ranjan, R., Abhishek K., Patra, K., Pal, S. K., Samantaray, A. K., “Prediction of drill flank wear using a neuro-GA model” Proceedings of the Global Conference on Production and Industrial Engineering, (CPIE), NIT Jalandhar.
2007
13
Sarkar, A., Pal, S., Pal, S. K., Samantaray, A. K., “Prediction of welding joint strength and bead geometry in pulsed gas metal arc welding using artificial neural network” Proceedings of the Global Conference on Production and Industrial Engineering, (CPIE), NIT Jalandhar.
2007
12
Saha, P., Singha, A., Pal, S. K., Saha, P., “A neural network approach for modeling the wire electro discharge machining of tungsten carbide cobalt composite”, Proceedings of the Global Conference on Production and Industrial Engineering, (CPIE), NIT Jalandhar, 38.
2007
11
Pal, S., Pal, S. K., Samantaray, A., K., “Determination of optimal pulse metal inert gas welding parameters using neuro-GA technique”, Proceedings of the 4th International Conference of Theoretical, Applied Computational and Experimental Mechanics (ICTACEM), IIT Kharagpur, 301.
2007
10
Patra, K., Pal, S. K., Bhattacharyya, K., “Artificial neural network based tool condition monitoring in drilling using vibration signal analysis”, Proceedings of the 4th International Conference of Theoretical, Applied Computational and Experimental Mechanics (ICTACEM), IIT Kharagpur, 476.
2007
9
Saha, P., Pal, S. K., Saha, P., “Application of fully supervised radial basis function network for prediction of machining performance in wire-EDM”, International Conference of Precision, Meso, Micro and Nano Engineering (COPEN), 81-86.
2007
8
Patra, K., Pal, S. K., Bhattacharyya, K., “Drill wear monitoring using current signature wavelet packet transform and artificial neural network”, IEEE International Conference on Industrial Technology, IIT Bombay, 1344-1348.
2006
7
Pal, S. K., Mukherjee, A., Karmakar, R., “A novel approach to metallurgical process modelling”, International Conference on Advances in Materials and Materials Processing (ICAMMP), I.I.T., Kharagpur, India, 591-598
2002
6
Pal, S. K., Talamantes-Silva, J., Linkens, D. A., Howard, I. C., “Bond graph and finite element analysis of temperature distribution in hot rolling processes”, International Conference on Thermomechanical Processing : Mechanics, Microstructure, Control, Sheffield, U.K.
2002
5
Pal, S. K., Linkens, D. A., “An integrated bond graph model for multipass rolling processes”, IEEE International Conference on Systems, Man and Cybernatics, Tunisia, 50.
2002
4
Pal, S. K., Linkens, D. A., “Bond graph modelling of thermal phenomena in hot rolling”, International Conference of Bond Graph Modelling (ICBGM), Society for Computer Simulation, Arizona, USA, 33(1), 253-256
2001
3
Pal, S. K., Linkens, D. A., “Effect of roll gap on temperature distribution in slab during steel hot rolling: A bond graph approach”, IFAC Symposium on Automation in Mining, Mineral and Metal Processing, Tokyo, Japan, 59-62.
2001
2
Pal, S. K., Linkens, D. A., “Effect of roll speed on temperature in hot metal rolling: A bond graph approach”, European Simulation Symposium, Marseilles, France, 818-821.
2001
1
Pal, S. K., Mukherjee, A., Karmakar, R., “Effect of surface motion on metal cooling and microstructural evolution: A bondgraphic view”, International Conference of Bond Graph Modelling (ICBGM), Society for Computer Simulation, USA, 31(1), 202-207.
1999


National
#TitleYear
19
Iqbal, Md P., Jain, R., Pal, S. K., Mandal, P., “An experimental and numerical study of friction stir pipe welding of AA6061-T6 aluminum alloys”, 56th National Metallurgists` Day and 72nd Annual Technical Meeting (NMD-ATM), Kolkata.
2018
18Pal, S. K.; “Industry 4.0 in friction stir welding”, National Conference on Advanced Functional Materials Processing and Manufacturing (NCAMMM), CMERI Durgapur.2018
17
Iqbal, Md P., Jain, R., Pal, S. K., “Finite element modeling of friction stir pipe welding”, National conference on Advanced Functional Materials Processing And Manufacturing, CMERI Durgapur, Excel India Publishers, New Delhi, 72-75.
2017
16Pal, S. K., Kumari, K., “Friction stir welding: Application and development”, 4th National Conference on Advances in Metrology (Ad-Met), CSIR-CMERI, XIV-XV.2015
15
Pal, K., Pal, S. K., “Artificial neural network based monitoring of weld quality in pulsed metal inert gas welding using wavelet packets of current signal” National conference on recent trends in manufacturing science and technology (RTMST), NITTTR, Kolkata.
2013
14
Pal, Kamal, Pal, S. K., “Neural network based modeling of joint mechanical properties in pulsed MIG welding using statistical features of sensor signals”, National Conference on Advances in Simulation and Optimization Techniques in Mechanical Engineering, KIIT University, Orissa.
2012
13
Saha, P., Pal, S. K., Saha, P., “Modeling and multi-objective optimization in wire electro-discharge machining of in-situ tic reinforced austenitic manganese steel matrix composite”, National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM), Jadavpur University, Kolkata.
2010
12
Jain, R., Pal, S. K., “Effect of process parameters on cutting forces and temperature in turning aisi 4340 using finite element approach”, National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM), Jadavpur University, Kolkata.
2010
11
Das Chakladar, N., Pal, S. K., Mandal, P. S., “Finite element estimation of cutting parameters in drilling glass fiber reinforced plastic (GFRP) plates”, National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM), Jadavpur University, Kolkata.
2010
10
Pal, K., Pal, S. K., “Artificial neural network based prediction of metal deposition in pulsed MIG welding using sensor signals”, National Conference on Recent Advances in Manufacturing Technology and Management (RAMTM), Jadavpur University, Kolkata, 169-174.
2010
9
Garg, S., Pal, S. K., Chakraborty D., “Effect of basis width on the performance of radial basis function network in prediction of drill wear”, Proceedings of the National Conference on Recent Trends in Information Systems and Management, Vidisha, M.P. 194-202.
2006
8
Panda, S. S., Chakraborty, D., Pal, S. K., “Prediction of drill flank wear using radial basis function neural network”, Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications, NIT Rourkela, 94-102.
2006
7
Mandal, D., Pal, S. K., Saha, P., “Modelling of electric discharge machining using artificial neural network”, Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications, NIT Rourkela, 153-158.
2006
6
Pal, S., Pal, S. K., Samantaray, A. K., “A review on gas metal arc welding process modelling and control using soft computing”, Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications, NIT Rourkela, 145-152.
2006
5
Patra, K., Pal, S. K., Bhattacharyya, K., “Application of a soft computing technique in drilling”, Proceedings of the National Conference on Soft Computing Techniques for Engineering Applications, NIT Rourkela, 137-144.
2006
4
Saha, P., Pal, S. K., Saha, P., “A survey of soft computing methods used in wire-edm”, Proceedings of the 12th National Conference on Machines and Mechanisms, IIT Guwahati, 243-248.
2005
3
Patra, K., Pal, S. K., “Soft computing techniques applied to tool condition monitoring in drilling-a review”, Proceedings of the 12th National Conference on Machines and Mechanisms, IIT Guwahati, 189-194.
2005
2
Mandal, M., Pal, S. K., “Bond graph modelling of temperature distribution within a slab in reheat furnace”, Proceedings of the National Conference on Advance Manufacturing and Robotics, Durgapur, India, 427-434.
2004
1
Pal, S. K., Muramalla, B. S., “Finite element application in metal cutting”, Lecture Notes on Application of Finite Element Method in Manufacturing (QIP-Short-Term Course), IIT Guwahati, 43-56.
2004


Doctoral Scholars Supervised




Ongoing Scholars




Avishek Mukherjee



Graduated Scholars




Dr. Karali Patra
IIT Patna
Peronsal Website

Dr. Sukhomay Pal
IIT GuwahatiPeronsal Website

Dr. Probir Saha
IIT Patna
Peronsal Website

Dr. Kamal Pal
VSSUT, Burla
Peronsal Website



Dr. Amrita Priyadarshini

BITS PilaniPeronsal Website

Dr. Soumya S Mohapatra
NIT Rourkela
Peronsal Website

Dr. Samik Dutta
CMERI
Peronsal Website

Dr. Harshadeep S Joshi
DBATU University
Peronsal Website



Dr. Ravi Shankar S N
Malnad College of Engineering
Peronsal Website

Dr. A M Tiara

Peronsal Website

Dr. Matruprasad Rout
KIIT University
Peronsal Website

Dr. Ishita Sarkar
CMERI
Peronsal Website



Dr. Samarshi Chakraborty
PDF at IIT Kanpur
Peronsal Website



Dr. Vyas Mani Sharma
PDF at Tel Aviv University
Peronsal Website

Dr. Debasish Mishra
Assistant Professor at Woxsen University, Hyderabad
Peronsal Website

Dr. Iman Sengupta



Dr. Omkar Mypati
PDF at University of Nottingham
Peronsal Website

Dr. Md. Perwej Iqbal
Assistant Professor at Rashtrakavi Ramdhari Singh Dinkar College of Engineering Begusarai
Peronsal Website



Invited Seminars / Webinars (Post-Covid era)

#DateTitle of talkEvent titleOrganization
7705.12.24GenAI in ManufacturingA Webinar Panel discussion on GenAi Solutions for Manufacturing IndustriesiFIX tech Global
7617.11.24Industry 5.0 : Co-creation and collaboration between human and machine NIT Silchar
7516.11.24Human-Centric Manufacturing: Exploring the Next Frontier with Industry 5.0Symposium on National Frontiers of Engineering (NatFoE) & IMP 2024NIT Warangle
7415.11.24Industry 5.0 - where human cognition meets intelligent machines IIT Madras
7325.09.24Artificial Intelligence : Awareness and Potential Kolaghat Thermal Power Plant High School
7226.06.24Industrial AI: Possibilities, Challenges, Sustainability: Evolution of Industry 5.0Keynote talk at Navigating Industry 5.0 with human-machine collaborationTata Consultancy Services and ACM India
7127.05.24Smart ManufacturingNIT Jamshedpur
7013.05.24Industry-Academia Research Collaboration: A model with success stories at IIT KharagpurLehigh University, USA
6927.04.24Artificial Intelligence: Awareness and PotentialWorkshop on Artificial Intelligence (AI)Gulmohor High School
6824.04.24AI-driven solutions for TML Commercial Vehicle Business Unit Tata Motors Limited Jamshedpur
6722.04.24Artificial Intelligence in Welding and Additive Manufacturing NIT Warangal
6611.04.24Industrial AIGroup ColloquiumWarwick Manufacturing Group (WMG), UK
6509.04.24Artificial Intelligence for Industrial Research (AIIR)Introductory Seminar: AIIRIIT Kharagpur
6406.04.24Deployment of Artificial intelligence in automobile industries Tata Motors Limited Pune
6323.03.24CoEAMT-TML collaboration Tata Motors Limited Jamshedpur
6220.12.23Industry 4.0Webinar on Evolving with Industry 4.0: Smart ManufacturingLarsen and Tubro (L&T)
6106.12.23Industrial AITU Wien, Vienna, Austria
6011.10.23Industrial AI34th CoboTalksIIT Delhi Innovation Hub for Cobotics
5923.09.23Jontro Kobe manob er moto hobe? / When would a machine be conscious?Science Seminar on AIKolaghat Thermal Power Plant High School
5807.09.23Artificial Intelligence for Automobile Industries TVS Motor
5706.09.23Possibility of AI deployment in Automobile Industries Maruti Suzuki India Limited
5601.09.23Industrial Artificial Intelligence and Step ForwardKeynote talk at the International Conference UNIfied2023University of Huddersfield, UK
5503.08.23AI to solve industrial problem with a focus to FSAM, LAAM and WAAM University of Kentucky, USA
5428.07.23Industrial AIASME Tech Seminar, ASME IEM Students' ChapterIEM Kolkata
5311.07.23Industrial AILehigh University, USA
5227.06.23Industrial AI University of Wisconsin Milwaukee, USA
5109.06.23Artificial Intelligence for Industrial Applications University of Connecticut, USA
5027.05.23Applications of Artificial Intelligence in ManufacturingInternational Symposium on Dynamics, Monitoring and DiagnosisChina (online)
4928.04.23Industry 4.0 Applications for Intelligent Manufacturing IIEST Shibpur
4801.04.23Industry 4.0 Voltas Limited, Faridabad
4702.03.23Panel discussionTransition from Industry 4.0 to Industry 5.0Tata Metaliks Limited, Kharagpur
4621.02.23Industrial AI University of Huddersfield
4501.02.23AI and its potential in Smart ManufacturingCurrency Printers DayBharatiya Reserve Bank Note Mudran (BRBNM) Salboni
4421.01.23Solutions from CoEAMT & FSW LabIndia International Science Festival (IISF)MANIT, Bhopal
4318.12.22Industry 4.0Application of Soft-computing techniques and Numerical Modeling in “Additive Manufacturing and Materials Processing” (A2MP 2022)NIT Surat
4213.12.22Industrial AI Applications: Current Trends and Way Forward Engineers India Limited, Delhi
4110.12.22Discussion panel on modern manufacturing concepts BIT Mesra
4002.12.22Panel discussion on “Leveraging Technology and Automation for Sustainable Growth”CE Manufacturing Summit, organized by iCEMA and Ministry of Heavy IndustriesiCEMA, Delhi
3925.11.22AI-based solutions by CoEAMT, IIT Kharagpur Larsen and Tubro Special Steels and Heavy Forgings unit
3815.11.22Industry 4.0 and Digital Twin IIT Guwahati
3703.11.22Introduction to Modern Manufacturing Process, Industry 4.0 IIIT Naya Raipur
3607.10.22Activities of IIT Kharagpur towards Industry 4.0Conference on Industry 4.0: Challenges Ahead and Way ForwardMinistry of Heavy Industries
3520.08.22Keynote speechInternational conference of The Efficiency and Performance Engineering Network 2022 (TEPEN2022)University of Huddersfield
3430.07.22Industry 4.0 University of Detroit Mercy
3328.07.22Robot-to-Robot Coordination in manufacturing applications Michigan State University
3220.07.22Can a machine behave like a HumanInstitute workshopNIT Surat
3123.06.22Panel discussion on “collaborative needs - opportunities, challenges and action plan”UK India Advanced Manufacturing Pathfinder ProgrammeUKRI, Innovate UK, DST, UKIBC
3023.06.22Artificial Intelligence in Industrial Research University of Connecticut, USA
2918.06.22Industry 4.0 University of Rhode Island, USA
2812.04.22Jontro Kobe manob er moto hobe? / When would a machine be conscious?Diamond Jubilee Celebration programsNimpura Aryya Bidyapith, Kharagpur
2729.03.22Panel discussion on “Emerging Careers in Industry 4.0”Know Your Career (KYC) Knowledge Webinar Series 2022FICCI (Federation of Indian Chambers of Commerce & Industry), Delhi
2611.03.22Panel discussionManufacturing and MSME Conclave 2022Bengal Chamber of Commerce & Industries, Kolkata
2522.02.22Digitalization needed in Indian Industries Bengal Chamber of Commerce & Industries, Kolkata
2417.02.22Can we make our machines Conscious? Institute of Engineering and Management Kolkata
2306.02.22Industry 4.0 SAIL Durgapur
2212.01.22Human Intelligence, Artificial Intelligence and Cognitive Intelligence in ManufacturingDigital Twin WorkshopIIIT SriCity and Middlesex University, UK
2111.01.22Industry needs training and education in Manufacturing IISc Bangalore
2011.12.21Cognitive Intelligence in Manufacturing Assam Down Town University
1910.12.21Digital Transformation Journey of Centre of Excellence in Advanced Manufacturing Technology with IndustryDTSM-2021: Digital Twin for Smart ManufacturingIISCO Steel Plant, Burnpur
1801.11.21Artificial Intelligence and Beyond Jalpaiguri Government Engineering College
1729.10.21Centre of Excellence in Advanced Manufacturing Technology at IIT Kharagpur All SAIL units, at Research & Development Centre for Iron & Steel (RDCIS)
1622.10.21Panel discussion“Industry 4.0 – Accelerating towards adoption and barriers to implementation” at the 7th CII Smart Manufacturing SummitConfederation of Indian Industry
1519.10.21Centre of Excellence in Advanced Manufacturing Technology at IIT Kharagpur Michigan State University
1417.10.21“Industry 4.0 – Accelerating towards adoption and barriers to implementation” at the 7th CII Smart Manufacturing SummitTechFestIIT Bombay
1305.10.21Centre of Excellence in Advanced Manufacturing Technology at IIT Kharagpur Management Training Institute (MTI), Research and Development Centre for Iron and Steel (RDCIS) - SAIL
1204.10.21Manufacturing: Advanced, Artificially Intelligent and Beyond CSIR-Central Mechanical Engineering Research Institute Durgapur
1130.09.21Panel discussionCSIR-Central Mechanical Engineering Research InstituteIISc Bangalore
1015.09.21Artificial Intelligence for ManufacturingOnline Expert LectureNIT Durgapur
910.09.21Friction Stir Welding Laboratory, IIT Kharagpur aiCAMstir, Artificial Intelligence based Computer Aided Manufacturing of Friction Stir Welds
823.08.21Smart ManufacturingExpert Talks from SAMARTH Udyog CentresCentral Manufacturing Technology Institute
712.08.21Centre of Excellence in Advanced Manufacturing Technology at IIT Kharagpur Tata Motors Limited Jamshedpur
607.06.21Artificial and Human-like Intelligence in ManufacturingDepartment Webinar SeriesIIT Jodhpur
528.03.21Panel discussionSession: IoT for Advanced Manufacturing 2nd International Conference on Advanced Computing and Applications 2021The Computer Society of India, Kolkata Chapter
416.03.21AI in Manufacturing NIT Sikkim
322.12.20Panel discussionStartup and Innovation: Towards a self-reliant IndiaConfederation of Indian Industry
210.09.20Sustainable and Digital Manufacturing towards Industry 4.0 (SDMI-2020) Veer Surendra Sai University of Technology, (formerly known as University College of Engineering (UCE), Burla, Odisha
107.09.20Industry 4.0Future Trends in Mechanical Engineering (NSFTME 2020)Parala Maharaja Engineering College, Brahmapur, Odisha


Technology / Products developed

#Technology DetailsGallery
1.
iWeld: an AI-enabled NDT software

Details:
This solution encompasses a real-time AI-enabled image processing platform for the evaluation of weld images captured through non-destructive digital radiography for joint quality assessment including classification and localization of the joint defects.

Industry involved:
Garden Reach Shipbuilders & Engineers

Copyright:
  • Gulshan, R., Paswan, U., Pal, S. K., Mukherjee, A., AI Enabled NDT System (Diary No: 21253/2023-CO/SW).
i-Weld
2.
iToFD: an AI-enabled NDT software

Details:
This solution revolutionizes the detection and sizing of weld defects using ultrasonic time-of-flight diffraction (ToFD) data. This cutting-edge system integrates advanced signal processing with AI algorithms for precise defect localization and measurement.

Organization involved:
Technology Innovation Hub, IIT Kharagpur

Patent:
  • Vishwanathan, A. K., Dutta, A., Mukherjee, A., Pal, S. K., A method and system for automatically detecting weld defects in ultrasonic Time-of-Flight Diffraction (ToFD) (Filed Ref No: 202331060331). Granted, Patent no,: 529585.
i-ToFD

Free web-based demo version coming soon...
3.
EyeVib: Insights to Vibration

Details:
This solution provides a machine learning-based system for the health monitoring of the exhauster, which is one of the critical equipment in the steel manufacturing industry.

Industry involved:
Research & Development Centre for Iron & Steel (RDCIS) SAIL,Ranchi

Conference publications:
  • Das, A., Agarwal, A., Kundoliya, N., Dutta, A., Pal, S. K., Kumar, R., “Condition monitoring of industrial exhaust motor-fan assembly using statistical feature optimization with nature-inspired optimizers”, 3rd International Conference on Control, Instrumentation, Energy & Communication (CIEC), University of Calcutta, IEEE, 2024.
  • Agarwal, A., Das, A., Mondal, K., Dutta, A., Pal, S. K., Kumar, R., Appukuttan, A.P., Mallarapu, S., “An integrated system using real-time sensor data and cloud technology for vibration analysis in industrial machine health monitoring” Proceedings of the XVIII Vibration Engineering & Technology of Machinery Conference (VETOMAC), Indian Institute of Technology Roorkee, Uttarakhand, 2023.
EyeVib

Free web-based demo version

CLICK HERE
4.
iTT: intelligent Tyre Tracer

Details:
This AI-driven solution for tyre specification reading and downstream analytics leverages advanced image acquisition, precise text detection, seamless backend integration, and an intuitive user interface.

Industry involved:
Tata Motors Limited, Jamshedpur
iTT
5.
Real time weld quality monitoring, prediction and machine control

Details:
This invention proposes a real-time Friction Stir Welding (FSW) process monitoring and control system using multiple sensors. The sensory data is sent to a cloud server for analysis using signal processing and machine learning, enabling real-time quality prediction. When deviations are detected, it adjusts FSW parameters for improved weld quality.

Industry involved:
Tata Consultancy Services Limited

Patents:
  • Kumar, K., Majumdar, A., Chandra M. G., Kumar, A., Mishra, D., Pal, S. K., Method and system for multi sensor fusion using tranform learning (Filed Ref No: 202021036163).
  • Mishra, D., Pal, S. K., Gupta, A., Raj, P., Kumar A., Anwer S., Chakravarty, D., Pal, S., Chakravarty, T., Pal, A., Misra, P., and Misra, S. A System for Real Time Monitoring, Prediction and Control of Weld Quality in Friction Stir Welding (Filed Ref No: 202031000072). Granted, Patent no,: 517687.
  • Pal, S. K., Rohan Basu, R., Singh, A. K., Barua, A., Kumar, A., Ghosh, A., Majumdar, S., Riya, Mishra, D., and Pal, S. System for real-time monitoring and controlling friction stir welding, (Filed Ref No: 201831024813). Granted, Patent no,: 537304.




FSW


Industrial collaborations

#IndustryProjectStatus of collaboration
1.TCS LogoRemote Monitoring and Real Time Control of Defects in Friction Stir Welding Process and Preventive Health Monitoring of Friction Stir Welding MachineComplete
2.GRSE LogoDevelopment and Implementation of an Artificial Intelligence enabled weld defect identification and classification systemComplete
3.SAIL LogoDevelopment of machine learning based exhauster health monitoring and prediction systemComplete
4.TML Logo
Jamshedpur Commercial Vehicle Division
  • Development of a low-cost AI-based tyre specification reading and downstream analytics
  • AR/VR in Manufacturing applications
  • Real-time weld defect monitoring and control in Body in White (BIW) structure of automotive vehicles
  • Cobot based vision analytics for quality inspection in automobile process line
Ongoing
5.Amplo Global Logointelligent Data Interfacing (iDI): development of AmploFly4.0TM data moduleOngoing
6.BSCL LogoReal-time Al-based image processing solution for Inspection of quality of outdoor unit of split ACOngoing
7.YUVYA LogoDesign review of the automatic kitchen systemOngoing
8.TML Logo
Pune Passenger Vehicle Division
  • Roof brazing defects capturing & proactive defect avoidance through Computer vision
  • Online Weld Spots quality, No. of spots detection through image processing
  • Synchro cone gear assembty qap detection
  • Detection of clinching for locknut
  • Vision detection to place right layshaft on nght model of transaxle assembly
NDA signed
9.TVS LogoPossible application of friction stir welding in structural components of motorbikeNDA signed
10.Synergies Castings Limited LogoEmployment of friction stir welding for fabrication of alloy wheelsNDA signed
11.VOLTAS LogoAn energy-efficient water cooler with an innovative cooling strategyDiscussion ongoing
12.ITC Logo
  • Online prediction of process parameters to control the bulk raw material properties
  • Low-cost vision system for online foreign matter detection
  • Arrangement of assorted gifting packs using cobots & low-cost vision system integration
Discussion ongoing